Direct Experimental Support for the Catalytic Effect of Iron-Group Metals on Electrodeposition of Rhenium
نویسندگان
چکیده
Direct Experimental Support for the Catalytic Effect of Iron-Group Metals on Electrodeposition of Rhenium Adi Naor, Noam Eliaz,* Larisa Burstein, and Eliezer Gileadi** Biomaterials and Corrosion Laboratory, The Materials and Nanotechnologies Program, Wolfson Applied Materials Research Center, and School of Chemistry, Raymond and Beverly Sackler Faculty of Exact Sciences, Tel-Aviv University, Ramat-Aviv 69978, Israel
منابع مشابه
Microstructure and composition of pulse plated Re–Ni alloys on a rotating cylinder electrode
The effect of pulse electrodeposition parameters on the composition and microstructure of Ni–Re alloys were studied on a rotating cylinder electrode. Ni–Re alloys were deposited from a citrate bath where the nickel-to-rhenium ratio was 45:1. The composition of the deposited alloy was monitored by energy dispersive spectroscopy (EDS) and compared to a single component transport-based model descr...
متن کاملElectrodeposition of Alloys of Rhenium with Iron-Group Metals from Aqueous Solutions
Rhenium Re –Me alloys where Me = Ni, Fe, or Co were deposited galvanostatically. The plating bath consisted of ammonium perrhenate, nickel or cobalt sulfamate, or iron sulfate, citric acid, and magnesium sulfamate. The effects of bath chemistry and deposition time on faradaic efficiency FE , Re content, and partial deposition currents were determined. Rhenium contents as high as 93 atom % or FE...
متن کاملCorrelation between catalytic activity and bonding and coordination number of atoms and molecules on transition metal surfaces: Theory and experimental evidence.
Correlation between catalytic activity and low-energy local electronic fluctuations in transition metals is proposed. A theory and calculations are presented which indicate that maximum electronic fluctuations take place at high-coordination metal sites. Either (i) atomically rough surfaces that expose to the reactant molecules atoms with large numbers of nonmagnetic or weakly magnetic neighbor...
متن کاملCatalytic Reforming of n-Heptane on Platimum - Rhenium Supported on Gamma-Alumina
Catalyitic reforming is one of the refinery processes in catalyst conversion that results to anincreases in octane number of naphtan which leads to production of gasoline with higher octanenumber. Hydrocarbons with high octan number that are produced in reforming process are as;aromatics, paraffins, isomers and etc.Not only Aromatics are used as fuel for motors but they are also useful in petro...
متن کاملCHARACTERIZATION OF CO-FE MAGNETIC FILMS FABRICATED BY GALVANO-STATIC ELECTRODEPOSITION
In this research, nanocrystalline Co-Fe coatings were electrodeposited on copper substrate. The influence of current density on different properties of the films at two pH levels was investigated. All the coatings showed nodular structure with rougher morphology at higher current densities. Due to anomalous deposition at higher current density, the amount of iron content increased and reached i...
متن کامل