Detection of Disturbing Loads in Power Systems using Non-Active Powers
نویسندگان
چکیده
This paper detects the disturbing loads in distorted and/or un-balanced three phase three wire power system. It is based on the simultaneous measurement of four non-active power quantities, which are found on the IEEE Std. 1459-2000 method. It allows, achieving better knowledge of the power system when both harmonic distortion and un-balance are present. The proposed method requires only the fundamental components from the harmonic content of voltage and current. The advantage of this method is, it does not require any spectral analysis of voltage and current. In this paper, usefulness is discussed by means of number of model tests, which were carried out on an effortless test system.
منابع مشابه
Detection of Disturbing Loads in Power Systems using Non-Active Power
This paper detects the disturbing loads in distorted and/or unbalanced three phase three wire power system. It is based on the simultaneous measurement of four non-active power quantities, which are found on the IEEE Std.1459-2000 method. It allows, achieving better knowledge of the power system when both harmonic distortion and un-balance are present. The proposed method requires only the fund...
متن کاملActive Filter Control Method Based on Direct Power Control for Compensating Reactive Powers due to Unbalanced Voltages and Nonlinear Loads
Active filters have proven to be more effective than passive techniques to improve power quality and to solve harmonic and power factor problems due to nonlinear loads. This paper proposes a control scheme based on the instantaneous active and reactive power. The inverter of this active filter is a three-phase, two-level converter. Space vector technique is used as modulators and pattern genera...
متن کاملA Nonlinear Voltage Stability Index based on Vector Analysis Method and Measurements of Active and Reactive Powers of Power System
This paper proposes a new voltage stability assessment method based on vector analysis method. This index extraction process relies on measurements of active and reactive powers from connected buses to the generator buses. Therefore, a limit for beginning of voltage collapse is determined based on the maximum power transfer theory. On the other hand, when the system requires load shedding, a ne...
متن کاملA Fast Voltage Collapse Detection and Prevention Based on Wide Area Monitoring and Control
Voltage stability is one of the most important factors in maintaining reliable operation of power systems. When a disturbance occurs in the power system, it usually causes instabilities and sometimes leads to voltage collapse (VC). To avoid such problems, a novel approach called Vector Analysis (VA) is proposed that exploits a new instability detection index to provide wide area voltage stabili...
متن کاملSimultaneous Control of Active and Reactive Powers of Vanadium Redox Flow Battery Systems in Flexible Microgrids
This paper discusses the control of flexible microgrids, consisting of a Redox Flow Batteries (RFB) and a new power conditioning system (PCS) for the RFB. Considering the importance of energy storage, this study is essential in power systems that are developed cautiously. RFB is connected to power system by a DC/DC or DC/AC converter to produce a DC voltage. It is very important that this conve...
متن کامل