Vibrational effects on the reaction of NO(2)(+) with C(2)H(2): effects of bending and bending angular momentum.

نویسندگان

  • Jason M Boyle
  • Brady W Uselman
  • Jianbo Liu
  • Scott L Anderson
چکیده

NO(2)(+) in six different vibrational states was reacted with C(2)H(2) over the center-of-mass energy range from 0.03 to 3.3 eV. The reaction, forming NO(+)+C(2)H(2)O and NO+C(2)H(2)O(+), shows a bimodal dependence on collision energy (E(col)). At low E(col), the reaction is quite inefficient (<2%) despite this being a barrierless, exoergic reaction, and is strongly inhibited by E(col). For E(col)> approximately 0.5 eV, a second mechanism turns on, with an efficiency reaching approximately 27% for E(col)>3 eV. The two reaction channels have nearly identical dependence on E(col) and NO(2)(+) vibrational state, and identical recoil dynamics, leading to the conclusion that they represent a single reaction path throughout most of the collision. All modes of NO(2)(+) vibrational excitation enhance both channels at all E(col), however, the effects of bend (010) and bend overtone (02(0)0) excitation are particularly strong (factor of 4). In contrast, the asymmetric stretch (001), which intuition suggests should be coupled to the reaction coordinate, leads to only a factor of approximately 2 enhancement, as does the symmetric stretch (100). Perhaps the most surprising effect is that of the bending angular momentum, which strongly suppress reaction, even though both the energy and angular momentum involved are tiny compared to the collision energy and angular momentum. The results are interpreted in light of ab initio and Rice-Ramsperger-Kassel-Marcus calculations.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Study on the Laser Tube Bending Process: Effects of the Irradiating Length and the Number of Irradiating Passes

In this paper, the laser bending process of a circular tube made of mild steel has been investigated experimentally. For this purpose, the effects of the irradiating length and the number of irradiating passes on the main bending angle of a laser bent tube are studied. In addition, the main defects of the laser tube bending process such as lateral bending angle, ovality and thickness variation ...

متن کامل

Effects of temperature gradient magnitude on bending angle in laser forming process of aluminium alloy sheets

Laser forming is a thermal forming process which uses laser beam irradiation to produce the desired final forms. In this article, the effect of temperature gradient across  Al 6061-T6 aluminum sheets on bending angle is studied. Input parameters including laser power, scan velocity, beam diameter, and sheet thickness are the effective process parameters which influence the temperature gradient....

متن کامل

Chemical reaction and thermal radiation effects on MHD micropolar fluid past a stretching sheet embedded in a non-Darcian porous medium

The paper aims at investigating the effects of chemical reaction and thermal radiation on the steady two-dimensional laminar flow of viscous incompressible electrically conducting micropolar fluid past a stretching surface embedded in a non-Darcian porous medium. The radiative heat flux is assumed to follow Rosseland approximation. The governing equations of momentum, angular momentum, energy, ...

متن کامل

Effect of Cooling on Bending Angle and Microstructure in Laser Tube Bending with Circumferential Scanning

Laser tube bending is a flexible forming process. Two irradiation methods of axial and circumferential scanning are generally used to form metal tubes. The two most important disadvantages of circumferential scanning are its lower bending angle and the time interval required between each scan for cooling purpose. In this research, a novel cooling strategy during laser tube bending with circumfe...

متن کامل

A six dimensional quantum study for atom–triatom reactions: The H1H2O ̃H21OH reaction

A time-dependent wave packet method has been developed to study atom–triatom ABC1D→AB1CD reactions in full six dimensions ~6D!. The approach employs a body-fixed coupled angular momentum basis for three angular coordinates, and three 1D bases for three radial coordinates. It permits the calculation of diatom AB vibrational state resolved total reaction probability for an initial rovibrational s...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • The Journal of chemical physics

دوره 128 11  شماره 

صفحات  -

تاریخ انتشار 2008