An improved finite element model updating method by the global optimization technique ‘Coupled Local Minimizers’

نویسندگان

  • Pelin Gundes Bakir
  • Edwin Reynders
  • Guido De Roeck
چکیده

Finite element (FE)model updating technique belongs to the class of inverse problems in classicalmechanics. According to the continuum damage mechanics, damage is represented by a reduction factor of the element bending stiffness. In this study, a global optimizationmethod called ‘Coupled Local Minimizers’ (CLM) is used for updating the finite element model of a complex structure. In CLM, the local optimization processes are coupled so that better solutions than multistart local optimization consisting of independent runs are obtained. This is achieved by minimizing the average cost function of the local minimizers subjected to pairwise synchronization constraints. An augmented Lagrangian which contains the synchronization constraints both as soft and hard constraints is used and a network is derived in which the local minimizers communicate and exchange information through the synchronization constraints. In this study, the finite element model updatingmethod is applied on a complex structure with a complex damage pattern and 24 design variables using CLM.The damage scenario on the structure is based on the hinge pattern obtained from nonlinear dynamic time history analysis. The results show that damage is detected, localized and quantified very accurately by the FE model updating algorithm used. In the second phase of the paper, two levels of noise, namely; moderate and high noise are applied on the modal parameters. In the presence of noise, damage is located and detected very accurately. The extent of the damage is also quantified precisely and the MAC values as well as the relative eigenfrequency differences are improved substantially. In the third phase of the study, the CLMmethod is compared with other local optimization methods such as the Levenberg–Marquardt algorithm, Sequential Quadratic Programming and Gauss–Newton methods and the results show that the CLM algorithm gives better results in FE model updating problems compared to the above-mentioned local optimization methods. 2007 Elsevier Ltd. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Updating finite element model using frequency domain decomposition method and bees algorithm

The following study deals with the updating the finite element model of structures using the operational modal analysis. The updating process uses an evolutionary optimization algorithm, namely bees algorithm which applies instinctive behavior of honeybees for finding food sources. To determine the uncertain updated parameters such as geometry and material properties of the structure, local and...

متن کامل

Finite element model updating of a geared rotor system using particle swarm optimization for condition monitoring

In this paper, condition monitoring of a geared rotor system using finite element (FE) model updating and particle swarm optimization (PSO) method is onsidered. For this purpose, employing experimental data from the geared rotor system, an updated FE model is obtained. The geared rotor system under study consists of two shafts, four bearings, and two gears. To get the experimental data,  iezoel...

متن کامل

APPLICATION OF FINITE ELEMENT MODEL UPDATING FOR DAMAGE ASSESSMENT OF SPACE STRUCTURE USING CHARGED SYSTEM SEARCH ALGORITHM

Damage assessment is one of the crucial topics in the operation of structures. Multiplicities of structural elements and joints are the main challenges about damage assessment of space structure. Vibration-based damage evaluation seems to be effective and useful for application in industrial conditions and the low-cost. A method is presented to detect and assess structural damages from changes ...

متن کامل

A NEW APPROACH BASED ON FINITE ELEMENT MODEL UPDATING FOR STRUCTURAL DAMAGE IDENTIFICATION

In this study, the finite element model updating was simulated by reducing the stiffness of the members. Due to lack of access to the experimental results, the data obtained from an analytical model were used in the proposed structural damage scenarios. The updating parameters for the studied structures were defined as a reduction coefficient applied to the stiffness of the members. Parameter v...

متن کامل

STRUCTURAL DAMAGE DETECTION BY MODEL UPDATING METHOD BASED ON CASCADE FEED-FORWARD NEURAL NETWORK AS AN EFFICIENT APPROXIMATION MECHANISM

Vibration based techniques of structural damage detection using model updating method, are computationally expensive for large-scale structures. In this study, after locating precisely the eventual damage of a structure using modal strain energy based index (MSEBI), To efficiently reduce the computational cost of model updating during the optimization process of damage severity detection, the M...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2007