Manufacturing Processes and Process Control
نویسنده
چکیده
منابع مشابه
Monitoring Fuzzy Capability Index $widetilde{C}_{pk}$ by Using the EWMA Control Chart with Imprecise Data
A manufacturing process cannot be released to production until it has been proven to be stable. Also, we cannot begin to talk about process capability until we have demonstrated stability in our process. This means that the process variation is the result of random causes only and all assignable or special causes have been removed. In complicated manufacturing processes, such as drilling proces...
متن کاملA DMAIC approach for process capability improvement an engine crankshaft manufacturing process
The define–measure–analyze–improve–control (DMAIC) approach is a five-strata approach, namely DMAIC. This approach is the scientific approach for reducing the deviations and improving the capability levels of the manufacturing processes. The present work elaborates on DMAIC approach applied in reducing the process variations of the stub-end-hole boring operation of the manufacture of cra...
متن کاملCapability Indices for Rayleigh Process
Monitoring, control and improvement of quality are important for companies. Process capability indices (PCIs) are tools widely used by the industries to determine the quality of their products and the performance of their manufacturing processes. Classic versions of these indices were constructed for processes whose quality characteristics have a normal distribution. But, many of these ...
متن کاملInvestigation of Manufacturing Processes of the Metallic CNG Pressure Vessels
CNG vessels are used in many vehicles. Mass production of CNG pressure vessels requires exact understanding of process effective parameters. In this paper, the numerical analysis has been used to study the manufacturing parameters. The entire manufacturing processes, including deep drawing, redrawing and ironing, of an aluminum liner sample of CNG pressure vessel (without spinning) have been...
متن کاملAn economic-statistical model for production and maintenance planning under adaptive non-central chi-square control chart
Most of the inventory control models assume that quality defect never happens, which means production process is perfect. However, in real manufacturing processes, the production process starts its operation in the in-control state; but after a period of time, shifts to the out-of-control state because of occurrence of some disturbances. In this paper, in order to approach the model to real man...
متن کاملMonitoring the censored lognormal reliability data in a three-stage process using AFT model
Improving the product reliability is the main concern in both manufacturing and service processes which is obtained by monitoring the reliability-related quality characteristics. Nowadays, products or services are the result of processes with dependent stages referred to as multistage processes. In these processes, the quality characteristic in each stage is affected by the quality characterist...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1996