View image generation in perspective and orthographic projection geometry based on integral imaging.
نویسندگان
چکیده
A novel technique generating arbitrary view images in perspective and orthographic geometry based on integral imaging is proposed. After capturing three-dimensional object using a lens array, disparity estimation is performed for the pixels at the selected position of each elemental image. According to the estimated disparity, appropriate parts of elemental images are mapped to synthesize new view images in perspective or orthographic geometry. As a result, the proposed method is capable of generating new view images at arbitrary positions with high resolution and wide field of view.
منابع مشابه
Fast System Matrix Calculation in CT Iterative Reconstruction
Introduction: Iterative reconstruction techniques provide better image quality and have the potential for reconstructions with lower imaging dose than classical methods in computed tomography (CT). However, the computational speed is major concern for these iterative techniques. The system matrix calculation during the forward- and back projection is one of the most time- cons...
متن کاملSemiautomatic generation of three-view drawing of building using terrestrial laser scanning
Terrestrial laser scanning is an effective and efficient technique for acquisition of three dimensional data of indoor and outdoor environment in a short period of time. Precision of laser scanning data are usually within millimetres, which is satisfactory for building surveying and mapping. In recent years terrestrial laser scanning has been widely used in historical building preservation and ...
متن کاملGeneral Imaging Geometry for Central Catadioptric Cameras
Catadioptric cameras are a popular type of omnidirectional imaging system. Their imaging and multi-view geometry has been extensively studied; epipolar geometry for instance, is geometrically speaking, well understood. However, the existence of a bilinear matching constraint and an associated fundamental matrix, has so far only been shown for the special case of para-catadioptric cameras (consi...
متن کاملArtifact reduction techniques in Cone Beam Computed Tomography (CBCT) imaging modality
Introduction: Cone beam computed tomography (CBCT) was introduced and became more common based on its low cost, fast image procedure rate and low radiation dose compared to CT. This imaging modality improved diagnostic and treatment-planning procedures by providing three-dimensional information with greatly reduced level of radiation dose compared to 2D dental imaging modalitie...
متن کاملNon-Pinhole Approximations for Interactive Rendering
Depth images have been used to approximate scene geometry in a variety of interactive 3-D graphics applications. In previous work, images were constructed using orthographic or perspective projection which limits approximation quality to what is visible along a single view direction or from a single viewpoint. This paper shows that images constructed with non-pinhole cameras improve approximati...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics express
دوره 16 12 شماره
صفحات -
تاریخ انتشار 2008