Energy transfer from luminescent centers to Er3+ in erbium-doped silicon-rich oxide films

The modulation on luminescence of Er3+-doped silicon-rich oxide films by the structure evolution of silicon nanoclusters

A series of silicon-rich oxide (SRO) and erbium-doped SRO (SROEr) films imbedded with structural tunable silicon nanoclusters (Si NCs) have been fabricated using sputtering followed by post-annealing. The coalescence of Si NCs is found in the films with large Si excess. The energy transfer rate between Si NCs and Er3+ is enhanced, but the luminescence efficiencies of both Si NCs and Er3+ are re...

Energy Transfer from Silicon Nanocrystals to Er Ions Embedded in Silicon Oxide Matrix

Silicon (Si) based light emitting devices have drawn much attention for the integration of electronic and photonics. Si nanostructures (amorphous clusters or crystals) have been recognized as good candidates for effective light emitting devices (Bulutay, 2007; Seino et al., 2009; Takagahara & Takeda, 2007; Wolkin et al., 1999). However, photons emitted by Si nanostructures can be reabsorbed by ...

Exciton–erbium coupling and the excitation dynamics of Er3+ in erbium- doped silicon-rich silicon oxide

On the origin of emission and thermal quenching of SRSO:Er3+ films grown by ECR-PECVD

Silicon nanocrystals embedded in a silicon-rich silicon oxide matrix doped with Er3+ ions have been fabricated by electron cyclotron resonance plasma-enhanced chemical vapor deposition. Indirect excitation of erbium photoluminescence via silicon nanocrystals has been investigated. Temperature quenching of the photoluminescence originating from the silicon nanocrystals and the erbium ions has be...

Thermal annealing effects on photoluminescence properties of carbon-doped silicon- rich oxide thin films implanted with erbium

Results are presented from the photoluminescence properties of C-doped Si-rich thin film oxides implanted with Er, as investigated for various postdeposition implantation and subsequent annealing and passivation conditions. In particular, it was found that the near-infrared Er luminescence intensity can be increased by up to a factor of $4 after a postdeposition anneal at temperatures of 300–11...