Bias and sensitivity of stereo judgements in the presence of a slanted reference plane

نویسندگان

  • A Glennerster
  • S. P McKee
چکیده

The perceived depth of features is known to be affected by the presence of a slanted reference plane. Mitchison and Westheimer ((1984). Vision Research, 24, 1063-1070) reported that two lines appear to be at the same depth when they lie in a plane approximately parallel with the reference plane. We measured the perceived depth of two lines presented in front of a regular grid of dots that was either fronto-parallel or slanted about a vertical axis. The effect of the slanted grid on perceived depth diminished as the grid was moved further in disparity from the lines. We also found that the slanted grid affected the sensitivity to differences in disparity. The minimum threshold for detecting changes in disparity is normally lowest in the fixation plane and rises systematically with increasing pedestal disparity. In the presence of a slanted reference plane, the minimum threshold is at or close to the plane of equal perceived depth and rises with increasing disparity from this plane.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

On the Linear Combinations of Slanted Half-Plane Harmonic Mappings

‎In this paper,  the sufficient conditions for the linear combinations of slanted half-plane harmonic mappings to be univalent and convex in the direction of $(-gamma) $ are studied. Our result improves some recent works. Furthermore, a illustrative example and imagine domains of the linear combinations satisfying the desired conditions are enumerated.

متن کامل

PatchMatch Stereo - Stereo Matching with Slanted Support Windows

Common local stereo methods match support windows at integer-valued disparities. The implicit assumption that pixels within the support region have constant disparity does not hold for slanted surfaces and leads to a bias towards reconstructing frontoparallel surfaces. This work overcomes this bias by estimating an individual 3D plane at each pixel onto which the support region is projected. Th...

متن کامل

Stereo for Slanted Surfaces: First Order Disparities and Normal Consistency

Traditional stereo algorithms either explicitly use the frontal parallel plane assumption by only considering position (zero-order) disparity when computing similarity measures of two image windows, or implicitly use it by imposing a smoothness prior bias towards frontal parallel plane solution. However this introduces two types of systematic error for slanted or curved surfaces. The first type...

متن کامل

Monocular and binocular edges enhance the perception of stereoscopic slant

Gradients of absolute binocular disparity across a slanted surface are often considered the basis for stereoscopic slant perception. However, perceived stereo slant around a vertical axis is usually slow and significantly under-estimated for isolated surfaces. Perceived slant is enhanced when surrounding surfaces provide a relative disparity gradient or depth step at the edges of the slanted su...

متن کامل

Sensitivity to depth relief on slanted surfaces.

The finest stereoacuity is known to depend on the disparity of a target relative to other visible points. Here we show that a more important factor in determining sensitivity to displacement can be the disparity of a target relative to an invisible interpolation plane through other neighboring points. We tested the sensitivity of observers to displacements of the central column of a regular gri...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Vision Research

دوره 39  شماره 

صفحات  -

تاریخ انتشار 1999