A pulsed sputter negative ion source

نویسندگان

  • R. Balzer
  • F. Sperisen
چکیده

2014 A pulsed source for Cs-ions has been constructed as part of a sputter ion source in Hortig geometry. A beam of Cs-ions is extracted from a tungsten surface ionizer and bunched into pulses a few ns wide by a combination of velocity and path-of-flight modulation. It is expected that such a beam will produce intense pulses of negative ions having pulse widths in the ns range. REVUE DE PHYSIQUE APPLIQUÉE TOME 12, OCTOBRE 1977, PAGE

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Conceptual Design of a Sputter-type Negative Ion Source Based on Electron Cyclotron Resonance Plasma Heating

A design for a negative ion source based on electron cyclotron resonance plasma heating and ionization by surface sputtering is presented. The plasma chamber of the source is an rf-cavity designed for TE111 eigenmode at 2.45 GHz. The desired mode is excited with a loop antenna. The ionization process takes place on a cesiated surface of a biased converter electrode (cathode). The ion beam is fu...

متن کامل

Ion-Source Modeling and Improved Performance of the CAMS High-Intensity Cs-Sputter Ion Source

The interior of the high-intensity Cs-sputter source used in routine operations at the Center for Accelerator Mass Spectrometry (CAMS) has been computer modeled using the program NEDLab, with the aim of improving negative ion output. Space charge effects on ion trajectories within the source were modeled through a successive iteration process involving the calculation of ion trajectories throug...

متن کامل

Room-Temperature Deposition of DLC Films by an Ion Beam Method, Reactive Magnetron Sputtering and Pulsed Laser Deposition: Process Design, Film Structure and Film Properties

Structural and mechanical properties of diamond-like carbon films deposited by an anode layer source, Thin Solid Films 517 (2009) 6502. spectroscopy of diamond-like carbon films deposited by an anode layer source, Diamond Relat. Mater. 17 DLC films deposited at room-temperature by reactive magnetron sputtering and by an anode layer source – a comparative study, Relation between structural/topol...

متن کامل

Particle-in-cell simulations of hollow cathode enhanced capacitively coupled radio frequency discharges

Related Articles Radio frequency discharge with control of plasma potential distribution Rev. Sci. Instrum. 83, 02A720 (2012) Optimization of gas utilization efficiency for short-pulsed electron cyclotron resonance ion source Rev. Sci. Instrum. 83, 02A342 (2012) Hollow target magnetron-sputter-type solid material ion source Rev. Sci. Instrum. 83, 02B715 (2012) Numerical study of ion energy and ...

متن کامل

Sputter deposition processes

Sputter deposition is a widely used technique to deposit thin films on substrates. The technique is based upon ion bombardment of a source material, the target. Ion bombardment results in a vapor due to a purely physical process, i.e. the sputtering of the target material. Hence, this technique is part of the class of physical vapor deposition techniques, which includes, for example, thermal ev...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017