Nondestructive Evaluation of the Creep Damaged Ni-Based Superalloy Using Ultrasonic Wave Method

نویسندگان

  • H. K. Ann
  • C. S. Kim
  • Y. H. Shin
  • I. K. Park
چکیده

The effects of microstructures during creep on the ultrasonic attenuation have been investigated for Ni based superalloy (IN738LC). The cuboidal γ′ precipitates in the virgin material became coarsened preferentially in the direction perpendicular to the applied stress axis as creep time increased. The length of γ′ precipitates increased with creep time, while the width increased slightly. The increase in the ultrasonic attenuation with increasing creep time was discussed with the increase in the equivalent size of γ′ precipitates, which was related to the scattering of ultrasonic. Ultrasonic attenuation was found to have a linear correlation with the equivalent size of γ′ precipitates. It is suggested that the ultrasonic attenuation can be used as a potential nondestructive parameter for assessing the degree of creep damage of IN738LC superalloy.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Simulation of oxidation-nitridation-induced microstructural degradation in a cracked Ni- based superalloy at high temperature

In turbine engines, high temperature components made of superalloys may crack in a creep process during service. With the inward flux of the gases, e.g. oxygen and nitrogen, along those cracks, the microstructure of the superalloy substrate nearby the cracks may degrade by internal oxidation and nitridation. The aim of this study is to investigate and simulate the oxidation-nitridation-induced ...

متن کامل

Evaluating the Effect of Ta/W Ratio on Microstructure and Stress Rupture Properties of Ni-Based Single Crystal Superalloy PWA1483

In this study, the effect of Ta/W ratio on the microstructure and stress rupture properties of Ni-based single crystal (SX) superalloy PWA1483 was investigated. For this purpose, single crystal (SX) superalloys with different Ta/W ratios (0.75, 1.0, 1.32 and 1.5 in wt.%) were fabricated. The alloys were directionally solidified by Bridgman method under the same solidification condition at withd...

متن کامل

A fuzzy approach to the evaluation of human factors in ultrasonic nondestructive examinations

Human factors are among the main elements affecting the reliability of nondestructive examinations (NDE). In a man-machine system, human reliability is affected by many factors (performance shaping factors) whose influence on reliability cannot be easily expressed quantitatively. This paper identifies and ranks 59 perform-ance shaping factors by using a fuzzy reasoning method and proposes a pro...

متن کامل

Analytical Method to Determine the Tertiary Creep Damage Constants of the Kachanov-rabotnov Constitutive Model

The classic Kachanov-Rabotnov isotropic creep damage constitutive model has been used in many situations to predict the creep deformation of high temperature components. Typically, the secondary creep behavior is determined by analytical methods; however, the tertiary creep damage constants are found using a mixture of trial and error and numerical optimization. These methods require substantia...

متن کامل

Evaluation of Fire-Damaged Concrete: An Experimental Analysis based on Destructive and Nondestructive Methods

Fire damage to concrete causes contact-type defects that degrade its durability through impaired mechanical properties. Various nondestructive tests are used to evaluate defects induced by fire damage. Recently, nonlinear ultrasonic methods such as the nonlinear resonance vibration method and nonlinear modulation method have been introduced. These nonlinear methods are more sensitive to fire-in...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2006