An Improvement in Dynamic Response of a Direct Torque Controlled Induction Motor Using Sector Advancing Technique
نویسندگان
چکیده
-Among all the speed control techniques for induction motor drives, Direct Torque Control (DTC) method is simple and efficient because DTC is independent of machine rotor parameters and free from d-q transformation. Modern DTC based drives are equipped with estimators, observers, and machine intelligence systems to improve the dynamics and efficiency of the drive. This paper is aimed to focus on Sector Advancing Technique (SAT) for reducing the response time of the drive for a known torque command. Simulation studies are carried out using MATLAB/SIMULINK and results of DTC with SAT over conventional DTC are presented. Keywords— Induction Machine, Direct Torque Control, Stator flux, Torque ripple.
منابع مشابه
Current Limitation and Speed Drop Minimization in Optimal-Efficiency of Induction Motors
In conventional direct torque control (DTC), the stator flux is usually kept constant by controlling the x-axis component of the stator voltage in the stator flux reference frame. The torque is then controlled by the y-axis component of stator voltage. In this scenario, the stator current does not exceed its permissible value. However, in the so-called optimal efficiency mode, the induction mot...
متن کاملSeven-Level Direct Torque Control of Induction Motor Based on Artificial Neural Networks with Regulation Speed Using Fuzzy PI Controller
In this paper, the author proposes a sensorless direct torque control (DTC) of an induction motor (IM) fed by seven-level NPC inverter using artificial neural networks (ANN) and fuzzy logic controller. Fuzzy PI controller is used for controlling the rotor speed and ANN applied in switching select stator voltage. The control method proposed in this paper can reduce the torque, stator flux and to...
متن کاملPerformance Improvement of Direct Torque Controlled Interior Permanent Magnet Synchronous Motor Drives Using Artificial Intelligence
The main theme of this paper is to present novel controller, which is a genetic based fuzzy Logic controller, for interior permanent magnet synchronous motor drives with direct torque control. A radial basis function network has been used for online tuning of the genetic based fuzzy logic controller. Initially different operating conditions are obtained based on motor dynamics incorporating...
متن کاملOptimal Sensorless Four Switch Direct Power Control of BLDC Motor
Brushless DC (BLDC) motors are used in a wide range of applications due to their high efficiency and high power density. In this paper, sensorless four-switch direct power control (DPC) method with the sector to sector commutations ripple minimization for BLDC motor control is proposed. The main features of the proposed DPC method are: (1) fast dynamic response (2) easy implementation (3) use o...
متن کاملTorque Control of Brushless Direct Current Motor Drives Using Single Current Sensor with High Reliability
Due to the simple structure, high torque density, low maintenance, and high efficiency, brushless direct current (BLDC) motors are widely used in automation and industrial applications. A control strategy based on single current sensor is proposed for a four-switch three-phase BLDC motor system to lower cost and improve reliability. The whole working process of the BLDC motor is divided into si...
متن کامل