A look inside epitaxial cobalt-on-fluorite nanoparticles with three-dimensional reciprocal space mapping using GIXD, RHEED and GISAXS

نویسندگان

  • S. M. Suturin
  • V. V. Fedorov
  • A. M. Korovin
  • G. A. Valkovskiy
  • S. G. Konnikov
  • M. Tabuchi
  • N. S. Sokolov
چکیده

In this work epitaxial growth of cobalt on CaF2(111), (110) and (001) surfaces has been extensively studied. It has been shown by atomic force microscopy that at selected growth conditions stand-alone faceted Co nanoparticles are formed on a fluorite surface. Grazing-incidence X-ray diffraction (GIXD) and reflection high-energy electron diffraction (RHEED) studies have revealed that the particles crystallize in the face-centered cubic lattice structure otherwise non-achievable in bulk cobalt under normal conditions. The particles were found to inherit lattice orientation from the underlying CaF2 layer. Three-dimensional reciprocal space mapping carried out using X-ray and electron diffraction has revealed that there exist long bright 〈111〉 streaks passing through the cobalt Bragg reflections. These streaks are attributed to stacking faults formed in the crystal lattice of larger islands upon coalescence of independently nucleated smaller islands. Distinguished from the stacking fault streaks, crystal truncation rods perpendicular to the {111} and {001} particle facets have been observed. Finally, grazing-incidence small-angle X-ray scattering (GISAXS) has been applied to decouple the shape-related scattering from that induced by the crystal lattice defects. Particle faceting has been verified by modeling the GISAXS patterns. The work demonstrates the importance of three-dimensional reciprocal space mapping in the study of epitaxial nanoparticles.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Comparative STM and RHEED studies of Ge/Si(001) and Si/Ge/Si(001) surfaces

Although epitaxial growth has been traditionally monitored by reciprocal space techniques, such as reflection highenergy electron diffraction (RHEED), the development of surface-sensitive imaging techniques, such as scanning tunneling microscopy (STM), allows for monitoring in the real-space. RHEED averages information over relatively large sample regions, and is thus more representative of the...

متن کامل

Kinematic Mapping and Forward Kinematic Problem of a 5-DOF (3T2R) Parallel Mechanism with Identical Limb Structures

The main objective of this paper is to study the Euclidean displacement of a 5-DOF parallel mechanism performing three translation and two independent rotations with identical limb structures-recently revealed by performing the type synthesis-in a higher dimensional projective space, rather than relying on classical recipes, such as Cartesian coordinates and Euler angles. In this paper, Study's...

متن کامل

Epitaxy of Al films on GaN studied by reflection high-energy electron diffraction and atomic force microscopy

Epitaxy of Al films deposited on GaN has been studied using reflection high-energy electron diffraction ~RHEED!, atomic force microscopy ~AFM!, x-ray diffraction, and ion channeling techniques. Al ~111! films have been found to grow epitaxially on GaN ~0001! surfaces with Al ^21̄ 1̄&iGaN^21̄ 1̄0&. For growth at 15 and 150 °C with a deposition rate of 0.26 Å/s, the epitaxial quality of the film was ...

متن کامل

Chiral-Selective Growth of Single-Walled Carbon Nanotubes on Lattice-Mismatched Epitaxial Cobalt Nanoparticles

Controlling chirality in growth of single-walled carbon nanotubes (SWNTs) is important for exploiting their practical applications. For long it has been conceptually conceived that the structural control of SWNTs is potentially achievable by fabricating nanoparticle catalysts with proper structures on crystalline substrates via epitaxial growth techniques. Here, we have accomplished epitaxial f...

متن کامل

Investigating the Stress Distribution Applied to Edentulous Ridge from Polyamide and Cobalt-Chrome Removable-Partial-Dentures using Three-Dimensional Finite-Element-Analysis

Abstract: Objective: The objective of this study was to compare the Von-Mises-stress (VMS) distribution applied to the edentulous ridges from a Polyamide RPD (PRPD) with those from a Cobalt-Chrome RPD (CCRPD). Materials and Methods: A patient with mandibular Kennedy Class I, Mod I was selected. The patientchr(chr('39')39chr('39'))s CBCT was cut off at 1 mm sections from the axial dimension. ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره 46  شماره 

صفحات  -

تاریخ انتشار 2013