The Effect of Non-metallic Inclusions and Films on the Cathode on Some Processes during Vacuum Discharges
نویسندگان
چکیده
منابع مشابه
Genetic Issues of Some of the Non Metallic Minerals in Lesser Himalaya
A brief account of the representative and workable industrial minerals namely magnesite, talc and barite in Lesser Himalaya, is presented here emphasizing their genesis. Deposits of magnesite and talc are found associated with Neoproterozoic, plateform type, shelf-slope limestone-dolomite host rocks from inner Lesser Himalayan sequences. Field, textural, geochemical signatures and fluid inclusi...
متن کاملپایدارسازی ساختار تتراگونال زیر‌کونیا در سرمتهای لایه نازکZr-O و وابستگی آن به اندازه بلورکها
In this research, thin films of Zr/ZrO2 composites were deposited by reactive magnetron sputtering technique on Si and fused Silica substrates, and their structures were investigated by XRD method. During the deposition of the cermet layers, a Zr metallic target was sputtered in a gas mixture of Ar and O2. By controlling of O2 flow rate, the different metal volume fractions in the cermet layer...
متن کاملThe Effect of Inclusions on Through-thickness Directional Fatigue Behavior of S355N Steel Plate
Microalloyed S355N steel plates are extensively used in bridge and high-rise building structures. One of the factors affecting the mechanical properties is the size and morphology of inclusions. In this research, microalloyed S355N steel plates with different sizes of inclusions were examined. One contained long manganese sulfide inclusions (LI material) and the other had short ones (SI materia...
متن کاملEVALUATION OF PRESSURE EFFECT ON HEAT TRANSFER COEFFICIENT AT THE METAL- MOLD INTERFACE FOR CASTING OF A356 AL ALLOY
Abstract: During solidification and casting in metallic molds, the heat flow is controlled by the thermal resistance at the casting-mold interface. Thus heat transfer coefficient at the metal- mold interface has a predominant effect on the rate of heat transfer. In some processes such as low pressure and die-casting, the effect of pressure on molten metal will affect the rate of heat transfer a...
متن کاملDesign and Simulation of Hot Cathode Ionization Vacuum Gauge with no X-Ray Limitations
In this paper, the MEMS type ionization gauge with no X-Ray limitations has been presented. Having the dimensions of 2.4 mm× 0.8mm × 1.4 mm, the designed gauge is 9000 times smaller than the conventional type and can operate in HV and UHV pressures up to 5×10-9 torr. Operating at the temperature of 750°C, the cathode of proposed gauge is implemented using nickel and works in a way in...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017