Wearing Tests on Copper Coated with Diamond by Triboadhesion
نویسنده
چکیده
-In this work are shown the results obtained from subjecting copper coated with diamond by triboadhesion to a wearing process with a plane rider. Here it is shown the ratio of the normal to shearing forces, called friction factor, as an indication of the resistance of the surface. Micro-Vickers tests shown a 23.2 % increase of hardness of the coated probes compare to non coated probes. Although similar behaviour on the friction factor was found between the coated a non coated probes, micrographs taken from them shown less weare on the coated ones.
منابع مشابه
A Morlet wavelet signal analysis with a Daubechies filter for the wear assessment of hip prostheses coated with diamond-like carbon by triboadhesion.
In the present work, based on high frequency wavelet analysis of dynamic signals of mechanical systems, a multiple-resolution wavelet analysis is carried out, to the signal obtained from an accelerometer mounted on the structure of a hip prosthesis wearing test device. The prostheses employed had a femoral head made of aluminum oxide and the acetabular cup of ultra-high-molecular-weight polyeth...
متن کاملAn Investigation on Two Types of Crystalline Micro-diamond Film Coated Tools Lapping with Sapphire Wafer
Two types of micron-diamond films were prepared on YG6 substrate by hot filament chemical vapor deposition(HFCVD) method. Morphology and orientation of crystalline growth were evaluated by SEM and XRD. Diamond film coated tools and sapphire wafer’ surface before and after lapping experiment were contrasted. The results indicated that a significant change in Raman spectrum of two types of micro...
متن کاملCorrosion Performance of Copper - Diamond Composites in Different Aqueous Solutions
In the present work copper/diamond composites, such as (Cu-10 Vf % diamond uncoated, Cu-30 Vf % diamond uncoated, Cu-10 Vf % diamond coated NiCrB and Cu-30 Vf % coated NiCrB) as heat sink materials have been fabricated using powder metallurgy and electroless techniques. The copper powder used in this study has been fabricated using electroless technique and the diamond powder was electroless co...
متن کاملEffect of Catalyst on the Growth of Diamond-like Carbon by HFCVD
Diamond like carbon (DLC) film was grown by hot filament chemical vapor deposition (HFCVD)technique. In the present work, we investigated the quality of the DLC films groew on the substratesthat were coated with various metal nanocatalysts (Au and Ni). A combination of CH4/Ar/H2 rendersthe growth of carbon nanostructures technique (diamond like carbon). The utilized samples werecharacterized by...
متن کاملA STUDY ON SINTERING BEHAVIORS OF COPPER COATED SIC COMPOSITE POWDERS FABRICATED BY ELECTROLESS PLATING AND MECHANICAL PROPERTIES OF THE CONSOLIDATED COMPOSITES
Copper coated SiC powders having three different amounts of copper, in the range of 20-60 wt%, were prepared via electroless coating process. The produced composite powders were uniaxially cold compressed and sintered at different temperatures and times under protective atmosphere. It was found that composite Cu/SiC powders and a relatively dense copper matrix composite with a uniform distribut...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2002