Magnetic Properties of Iron Cobalt Multilayered Films Deposited by Opposed Targets Sputtering
نویسندگان
چکیده
FefCo multilayered films with about 3 000 A thick have been deposited by an opposed targets sputtering apparatus. The films with deposition period dlayer above 10 A have layered structure. Their magnetic properties changes significantly with dl, and the film with dlayer around 60 A has the lowest coercive force of about 6 Oe and saturation magnetization about 1 600 emufcc.
منابع مشابه
-
X-ray diffraction measurements were performed on Co?Pt1-?/Pd, Co/Pd, Co/Fe, and Co/W multilayer samples with different structures, such as Co?Pt1-? alloy layer composition ?, bilayer thickness, and number of bilayers. Multilayer samples were made by magnetron sputtering in a chamber with multi-parallel guns and a position controllable substrate. Co?Pt1-? alloy layers were deposited by cosputter...
متن کاملSTRUCTURE AND MAGNETISM OF Fe/Al MULTILAYERED FILMS BY ION BEAM SPUTTERING METHOD
The crystal structure and magnetic properties of Fe/AI multilayered films prepared using the ion beam sputtering method have been investigated. The crystallite orientation and magnetism of Fe layers were found to depend significantly on A1 layer thickness. This resutt may be caused by the crystallographic interaction between Fe and A1 layers.
متن کاملMechanical Properties and Microstructural Evolution of Ta/TaNx Double Layer Thin Films Deposited by Magnetron Sputtering
Crystalline tantalum thin films of about 500nm thickness were deposited on AISI 316L stainless steel substrate using magnetron sputtering. To investigate the nano-mechanical properties of tantalum films, deposition was performed at two temperatures (25°C and 200°C) on TaNx intermediate layer with different N2/Ar flow rate ratio from 0 to 30%. Nano-indentation was performed to obtain the mechani...
متن کاملA Study of the Tribological Properties of Sputter-deposited MoSX/Cr Coatings
In this investigation, MoSx/Cr coatings were deposited by direct-current magnetron sputter onto Ck45 (AISI 1045) plain carbon steel substrates. The MoSx/Cr ratio in the coatings was controlled by sputtering the composite targets. The chemical characterization was performed using EDX (energy dispersive X-ray analysis); the structural characterization was accomplished by X-ray diffraction (XRD) s...
متن کاملEffect of Thickness on Structural and Morphological Properties of AlN Films Prepared Using Single Ion Beam Sputtering
Aluminum nitride (AlN) thin films have potential applications in microelectronic and optoelectronic devices. In this study, AlN thin films with different thicknesses were deposited on silicon substrate by single ion beam sputtering method. The X-ray diffraction (XRD) spectra revealed that the structure of films with thickness of - nm was amorphous, while the polycrystalline hexagonal AlN with a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2016