The stencil buffer sweep plane algorithm for 5-axis CNC tool path verification
نویسندگان
چکیده
A new algorithm based on the sweep plane approach to determine the machined part geometry in 5-axis machining with general APT tools is presented. Undercut and overcut can be determined. Collision detection between the toolholder, workpiece and workpiece fixture can also be detected. The subtraction of the removed material is obtained for each sweep plane by using a stencil buffer. A flat plane is swept through the blank part, fixture and tool swept volume geometry. The intersections of sweep planes and the swept tool volume are computed based on the canonical representation of a cone, torus and sphere. The necessary data to compute all the intersections is stored in a text file, here called the M-Plane file (Memory Plane). The equations of the intersections are approximated by a polygon with variable accuracy. The resulting APT tool intersection in each sweep plane is then clipped against the blank workpiece intersection with the current sweep plane. The stencil buffer provides automatically the union of all tool intersections and the subtraction from the blank workpiece. This algorithm provides a 3D geometric model of the tool swept volume. The display algorithm is based on the Painter’s algorithm, but there is no time consuming sorting from back to front required, as the sweep proceeds from back to front. The accuracy of the algorithm can be varied as a function of the requirements by changing the polygon approximation and the distance between the sweep planes. q 2003 Elsevier Ltd. All rights reserved.
منابع مشابه
Feed optimization for five-axis CNC machine tools with drive constraints
Real time control of five-axis machine tools requires smooth generation of feed, acceleration and jerk in CNC systems without violating the physical limits of the drives. This paper presents a feed scheduling algorithm for CNC systems to minimize the machining time for five-axis contour machining of sculptured surfaces. The variation of the feed along the five-axis tool-path is expressed in a c...
متن کاملSurface roughness parameters determination model in machining with the use of design and visualization technologies
A virtual reality machine shop environment was developed for the determination of critical quantitative and qualitative machining process parameters. Material removal and milling machine axes kinematics are simulated in real time. The G-Code program serves as the input to the system. A graphical model for the calculation of quantitative data affecting the machined surface roughness was develope...
متن کاملOptimization of Spindle loading and Tool Wear for CNC Turning Machine by Using Intelligent System
Intelligent knowledge based system (IKBS) is developed for optimizing dry CNC turning process using Taguchi method, CNC Machine, EN19 steel as the work piece material, andCutting Insert. Tool wear and spindle loading which are the machining parameters, spindle speed, feed rate, and depth of cut, areoptimized through the intelligent knowledge based system (IKBS). The experimental CNC turning mac...
متن کاملOptimization of Spindle loading and Tool Wear for CNC Turning Machine by Using Intelligent System
Intelligent knowledge based system (IKBS) is developed for optimizing dry CNC turning process using Taguchi method, CNC Machine, EN19 steel as the work piece material, andCutting Insert. Tool wear and spindle loading which are the machining parameters, spindle speed, feed rate, and depth of cut, areoptimized through the intelligent knowledge based system (IKBS). The experimental CNC turning mac...
متن کاملAn Exact Representation of Effective Cutting Shapes of 5-axis CNC Machining Using Rational Bezier and B-spline Tool Motions
Presented in this paper is a new approach to 5-axis CNC tool path generation for sculptured surface machining with a flat-end cutter. Rational Bézier and B-spline motions are used to plan cutter motions so that an exact representation of the effective cutting shape can be obtained. The exact representation leads to an accurate computation of the scallop curve generated by two adjacent tool path...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Computer-Aided Design
دوره 35 شماره
صفحات -
تاریخ انتشار 2003