Kinetic model and Simulation Analysis for Propane Dehydrogenation in an Industrial Moving Bed Reactor
ثبت نشده
چکیده
A kinetic model for propane dehydrogenation in an industrial moving bed reactor is developed based on the reported reaction scheme. The kinetic parameters and activity constant are fine tuned with several sets of balanced plant data. Plant data at different operating conditions is applied to validate the model and the results show a good agreement between the model predictions and plant observations in terms of the amount of main product, propylene produced. The simulation analysis of key variables such as inlet temperature of each reactor (Tinrx) and hydrogen to total hydrocarbon ratio (H2/THC) affecting process performance is performed to identify the operating condition to maximize the production of propylene. Within the range of operating conditions applied in the present studies, the operating condition to maximize the propylene production at the same weighted average inlet temperature (WAIT) is ΔTinrx1= -2, ΔTinrx2= +1, ΔTinrx3= +1 , ΔTinrx4= +2 and ΔH2/THC= -0.02. Under this condition, the surplus propylene produced is 7.07 tons/day as compared with base case. Keywords—kinetic model, dehydrogenation, simulation, modeling, propane
منابع مشابه
Kinetic model and Simulation Analysis for Propane Dehydrogenation in an Industrial Moving Bed Reactor
A kinetic model for propane dehydrogenation in an industrial moving bed reactor is developed based on the reported reaction scheme. The kinetic parameters and activity constant are fine tuned with several sets of balanced plant data. Plant data at different operating conditions is applied to validate the model and the results show a good agreement between the model predictions and plant observa...
متن کاملSuccessive Linearization-based Stochastic Repetitive Control Technique and its Applications to SMB and CATOFIN Processes
A repetitive control technique which is based on a time-varying stochastic state space model obtained by cycle-to-cycle linearization of a nonlinear fundamental process model around the operation trajectories in the previous cycle is introduced. The control technique was applied to two repetitive chemical processes: simulated moving bed, a continuous chromatograph separation process, and CATOFI...
متن کاملCFD Simulation of Dimethyl Ether Synthesis from Methanol in an Adiabatic Fixed-bed Reactor
A computational fluid dynamic (CFD) study of methanol (MeOH) to dimethyl ether (DME) process in an adiabatic fixed-bed reactor is presented. One of the methods of industrial DME production is the catalytic dehydration of MeOH. Kinetic model was derived based on Bercic rate. The parameters of this equation for a specific catalyst were tuned by solving a one-dimensional homogenous model using MAT...
متن کاملThe Effect of Alkali Metal Promoters on the Stability and Coke Formation of Platinum-Based Propane Dehydrogenation Catalysts: A Kinetic Study
The kinetics of catalyst deactivation and coke formation during dehydrogenation of propane over supported Pt–based catalysts and, in particular, the effect of alkali metal promoters on catalyst activity and stability were studied. The analysis of propane conversion data showed that there is an optimum level of alkali metal promoter loading for both catalyst activity and stability.A model ba...
متن کاملBiological Phosphorus and Nitrogen Removal from Wastewater Using Moving Bed Biofilm Process
In this research, an experimental study to evaluate nutrient removal from synthetic wastewater by a lab-scale moving bed biofilm process was investigated. Also, kinetic analysis of the process with regard to phosphorus and nitrogen removal was studied with different mathematical models. For nutrient removal, the moving bed biofilm process was applied in series with anaerobic, anoxic and aerobic...
متن کامل