Current Estimation on Multi-Layer Printed Circuit Board with Lumped Circuits by Near-Field Measurement
نویسندگان
چکیده
Current distribution on a 2-layer PCB with lumped circuits is estimated by measuring the near electric field. In this method, the current estimation model is made without considering the electrical parameters of lumped circuits. Experimental results are demonstrated and compared with the numerical results, confirming the validity of this method. key words: measurement, current distribution, near-field, PCB, lumped circuit
منابع مشابه
Modeling of High-speed Printed Circuit Board Abstract This thesis is an exercise to investigate the various methods of creating an equivalent circuit model for a high-speed digital printed circuit board (PCB)
This thesis is an exercise to investigate the various methods of creating an equivalent circuit model for a high-speed digital printed circuit board (PCB) assembly and to perform computer simulation on such a system. The term highspeed printed circuit board is widely accepted in the engineering community to be refering to PCB which is applied to digital system with operating frequency in excess...
متن کاملEmbedded Packaging Technologies: Imbedding Components to Meet Form, Fit, and Function
As the electronics industry moves toward smaller form and fit factors, advanced packaging technologies are needed to achieve these challenging design requirements. Current design problems are not driven by circuit design capabilities but by an inability to reliably package these circuits within the space constraints. Innovative packaging techniques are required in order to meet the increasing s...
متن کاملNumerical and Experimental Near Field Distributions in High-Frequency Planar Circuits
A new test system for measuring electric field profile in planar circuits such as microstrip-line has been developed. In order to estimate the measured electric field profile, the 3D full-wave analysis is carried out by using a finite-difference time domain technique for planar printed circuits in high-frequency ranges. A test system proposed in this paper based on a small coaxial probe antenna...
متن کاملImplementation of Non-linear Circuit Models under the Tlm
On the Printed Circuit Boards (PCBs), the interconnection geometry influences the ElectroMagnetic Compatibility (EMC) and the Signal Integrity (SI). The impact increases when circuits with a non-linear behavior are connected at their terminations. An accurate EMC analysis requires an electromagnetic solver including the model of those non-linear components. The insertion is made via lumped elem...
متن کاملCurrent Density Distribution Mapping in PEM Fuel Cells as An Instrument for Operational Measurements
A newly developed measurement system for current density distribution mapping has enabled a new approach for operational measurements in proton exchange membrane fuel cells (PEMFC). Taking into account previously constructed measurement systems, a method based on a multi layer printed circuit board was chosen for the development of the new system. This type of system consists of a sensor, a spe...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- IEICE Transactions
دوره 91-B شماره
صفحات -
تاریخ انتشار 2008