Fabrication of Nanomaterials by Pulsed Laser Synthesis
نویسندگان
چکیده
منابع مشابه
Laser-ablative Synthesis of Colloidal Nanomaterials for Biological Applications
Inorganic nanoparticles (plasmonic nanoparticles, semiconductor-based quantum dots etc) are known to offer novel promising properties for biological sensing and imaging, as well as for therapeutics. However, these applications are often complicated by potential toxicity issues, arising as a result of inadequate purification procedures of nanoparticles obtained via synthetic pathways using toxic...
متن کاملFabrication of synchronized hammer peening with pulsed laser welding and its effect on 6061 aluminum alloy weld
The non-continuous laser beam in pulsed lasers allows the mechanical peening between two consecutive beams on a still hot weld bead. At a very short time (20, 150 and 300 ms) after laser pulse application, mechanical peening was performed on the welding bead. To achieve these short times, the light sensor detects the nth laser pulse and the mechanical arm starts moving. Upon reaching the tip of...
متن کاملFabrication of synchronized hammer peening with pulsed laser welding and its effect on 6061 aluminum alloy weld
The non-continuous laser beam in pulsed lasers allows the mechanical peening between two consecutive beams on a still hot weld bead. At a very short time (20, 150 and 300 ms) after laser pulse application, mechanical peening was performed on the welding bead. To achieve these short times, the light sensor detects the nth laser pulse and the mechanical arm starts moving. Upon reaching the tip of...
متن کاملFabrication of graphene based on Q-switched Nd:YAG laser ablation of graphite target in liquid nitrogen
In this work, a novel technique is presented for the graphene fabrication based on the pulsed laser ablation of graphite target inside the cryogenic liquid using the pulsed nanosecond Q-switched Nd:Y3Al5O12 (Nd:YAG) laser at 1064 nm. Single-stage fabrication process is taken into account as a remarkable advantage without need to high vacuum devices and additional chemical components. The synthe...
متن کاملA General Approach for Fabricating Arc?Shaped Composite Nanowire Arrays by Pulsed Laser Deposition
Here, a new method is demonstrated that uses sideways pulsed laser deposition to deliberately bend nanowires into a desired shape after growth and fabricate arc-shaped composite nanowire arrays of a wide range of nanomaterials. The starting nanowires can be ZnO, but the materials to be deposited can be metallic, semiconductor, or ceramic depending on the application. This method provides a gene...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2015