Graphene quantum dots as the hole transport layer material for high-performance organic solar cells.
نویسندگان
چکیده
We present an investigation of organic photovoltaic (OPV) cells with solution-processable graphene quantum dots (GQDs) as hole transport layers (HTLs). GQDs, with uniform sizes and good conductivity, are demonstrated to be excellent HTLs in both polymer solar cells (PSCs) and small-molecule solar cells (SMSCs) with the blend of poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester (P3HT:PC61BM) and small molecule DR3TBDT:[6,6]-phenyl-C71-butyric acid methyl ester (DR3TBDT:PC71M) as the active layer, respectively. The PSCs and SMSCs based on GQDs yield power conversion efficiencies of 3.51% and 6.82%, respectively, both comparable to those of solar cells with PEDOT:PSS as the HTLs. In addition, the cells with GQDs as HTLs exhibit much more reproducible performance and longer lifetime. In light of the high stability, low cost and easy processing, these results indicate that GQDs can be potentially used to replace PEDOT:PSS for producing high-performance and stable organic photovoltaic cells.
منابع مشابه
Investigation of the Effect of Band Offset and Mobility of Organic/Inorganic HTM Layers on the Performance of Perovskite Solar Cells
Abstract: Perovskite solar cells have become an attractive subject in the solar energydevice area. During ten years of development, the energy conversion efficiency has beenimproved from 2.2% to more than 22%, and it still has a very good potential for furtherenhancement. In this paper, a numerical model of the perovskite solar cell with thestructure of glass/ FTO/ TiO2/...
متن کاملFew-layered graphene quantum dots as efficient hole-extraction layer for high-performance polymer solar cells
0.1016/j.nanoen.2 ublished by Elsevi thors. : [email protected] (L. Dai). Abstract In this study, we demonstrate that few-layered graphene quantum dots (F-GQDs) can be used as hole-extraction layer (HEL) for high efficiency polymer solar cells (PSCs). As a new class of HEL material, graphene oxide (GO) is not suitable for polymer solar cells (PSCs) based on highly efficient donor polymers due to...
متن کاملFurther Improvement in Efficiency of ZnO Nanorod Based Solar Cells Using ZnS Quantum Dots as Light Harvester and Blocking Layer Material
Zinc oxide nanorod arrays (ZnO NRs) were grown on the ZnO seed layers via an aqueous solution using hydrothermal method and their photovoltaic properties were investigated. It was found that the growth period of 20 minutes is the optimum condition for ZnO nanorods growth, the cell containing these nanorods was considered as a reference cell. In order to further increase the cell performance, Zn...
متن کاملFunctionalized graphene and other two-dimensional materials for photovoltaic devices: device design and processing.
Graphene is the thinnest two-dimensional (2D) carbon material and has many advantages including high carrier mobilities and conductivity, high optical transparency, excellent mechanical flexibility and chemical stability, which make graphene an ideal material for various optoelectronic devices. The major applications of graphene in photovoltaic devices are for transparent electrodes and charge ...
متن کاملEffect of PbS Film Thickness on the Performance of Colloidal Quantum Dot Solar Cells
Colloidal quantum dots offer broad tuning of semiconductor band structure via the quantum size effect. In this paper, we present a detailed investigation on the influence of the thickness of colloidal lead sulfide (PbS) nanocrystals (active layer) to the photovoltaic performance of colloidal quantum dot solar cells. The PbS nanocrystals (QDs) were synthesized in a non-coordinating solvent, 1-oc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Physical chemistry chemical physics : PCCP
دوره 15 43 شماره
صفحات -
تاریخ انتشار 2013