Free Convection in a Parallelogrammic Porous Cavity Filled with a Nanofluid Using Tiwari and Das’ Nanofluid Model
نویسندگان
چکیده
The free convection heat transfer of Cu-water nanofluids in a parallelogrammic enclosure filled with porous media is numerically analyzed. The bottom and top of the enclosure are insulated while the sidewalls are subject to limited temperature difference. The Darcy flow and the Tiwari and Das' nanofluid models are considered. The governing dimensionless partial differential equations are numerically solved using a finite difference code. The results are reported for isotherms and streamlines as well as Nusselt number as a function of the volume fraction of nanoparticles, porosity, types of the porous matrix, inclination angle, aspect ratio and different Rayleigh numbers. It is found that the presence of the nanoparticles inside the enclosure deteriorates the heat transfer rate, which is caused due to the increase of dynamic viscosity by the presence of nanoparticles. Therefore, in applications in which the nanofluids are used for their advantages, such as enhanced dielectric properties or antibacterial properties, more caution for the heat transfer design of the enclosure is necessary.
منابع مشابه
Numerical Study of Natural Convection in a Square Cavity Filled with a Porous Medium Saturated with Nanofluid
Steady state natural convection of Al2O3-water nanofluid inside a square cavity filled with a porous medium is investigated numerically. The temperatures of the two side walls of the cavity are maintained at TH and TC, where TC has been considered as the reference condition. The top and the bottom horizontal walls have been considered to be insulated i.e., non-conducting and impermeable to mass...
متن کاملInvestigation of Brownian Motion of CuO-Water Nanofluid in a Porous Cavity with Internal Heat Generation by Using of LTNE Model
In this paper, the effect of the Brownian term in natural convection of CuO-Water nanofluid inside a partially filled porous cavity, with internal heat generation has been studied. It is assumed that the viscosity and thermal conductivity of nanofluid consists of a static part and a Brownian part of which is a function of temperature and the volume fraction of nanofluid. Because of internal hea...
متن کاملEvaluation of wall thickness and porosity effects on the conjugate free convection heat transfer rate of hybrid nanofluid inside a square cavity
At present study, effects of wall thickness and porosity on the conjugate free convection heat transfer inside a square cavity have been examined. Continuity, momentum and energy equations for fluid and solid matrix phases are governing equations in present work. Mentioned equations and related boundary conditions have been transformed into their non-dimensional forms. They are solved using fin...
متن کاملNumerical study of a combined convection flow in a cavity filled with nanofluid considering effects of diameter of nanoparticles and cavity inclination angles
The present paper focuses on problem of mixed convection fluid flow and heat transfer of Al2O3-water nanofluid with temperature and nanoparticles concentration dependent thermal conductivity and effective viscosity inside Lid-driven cavity having a hot rectangular obstacle. The governing equations are discretized using the finite volume method while the SIMPLER algorithm is employed to couple v...
متن کاملNumerical Study of Natural Convection in an Inclined Cavity with Partially Active Side Walls Filled with Cu-water Nanofluid
The buoyancy-driven fluid flow and heat transfer in a square cavity with partially active side walls filled with Cu-water nanofluid is investigated numerically. The active parts of the left and the right side-walls of the cavity are maintained at temperatures Th and Tc, respectively, with Th>Tc. The enclosure’s top and bottom walls, as well as, the inactive parts of its side walls are kept insu...
متن کامل