On the Flexure of a Conical Frustum Shell
نویسنده
چکیده
SUMMARY This Report considers theoretically and experimentally some of the problems associated with the flexure of two unequal cylindrical shells Joined by a conical frustum. Particular attention is given to the determination of the overall flexursl stiffness of the conical frustum and to structural design considerations associated with the provision of a separation capability in the frustum. The results are particularly relevant to the design of multi-stage rockets.
منابع مشابه
Free Vibration Analysis of Continuously Graded Fiber Reinforced Truncated Conical Shell Via Third-Order Shear Deformation Theory
This paper deals with free vibration analysis of continuously graded fiber reinforced (CGFR) truncated conical shell based on third-order shear deformation theory (TSDT), by developing special power-law distributions. The orthotropic (CGFR) truncated conical shell are clamped and simply supported at the both ends. It is assumed to have a smooth variation of fibers volume fraction in the thickne...
متن کاملTransverse Sensing of Simply Supported Truncated Conical Shells
Modal signals of transverse sensing of truncated conical shells with simply supported boundary condition at both ends are investigated. The embedded piezoelectric layer on the surface of conical shell is used as sensors and output voltages of them in considered modes are calculated. The Governing sensing signal displacement equations are derived based on the Kirchhoff theory, thin-shell assumpt...
متن کاملAxisymmetric Buckling Analysis of Porous Truncated Conical Shell Subjected to Axial Load
This paper studied Buckling analysis of porous truncated conical shell subjected to axial load. It is considered that a fluid undrained between porous material and the Porous material properties vary across the thickness of shell with a specific function also assumed that the edge of the shell is simply supported. The governing equations are based on the Sanders kinematics equations and the fir...
متن کاملThree-dimensional Magneto-thermo-elastic Analysis of Functionally Graded Truncated Conical Shells
This work deals with the three-dimensional magneto-thermo-elastic problem of a functionally graded truncated conical shell under non-uniform internal pressure and subjected to magnetic and thermal fields. The material properties are assumed to obey the power law form that depends on the thickness coordinate of the shell. The formulation of the problem begins with the derivation of fundamental r...
متن کاملThe Buckling of Non-Homogeneous Truncated Conical Shells under a Lateral Pressure and Resting on a Winkler Foundation
In this paper, the buckling of non-homogeneous isotropic truncated conical shells under uniform lateral pressure and resting on a Winkler foundation is investigated. The basic relations and governing equations have been obtained for non-homogeneous truncated conical shells. The critical uniform lateral pressures of non-homogeneous isotropic truncated conical shells with or without a Winkler fou...
متن کامل