Complementary Push-Pull Amplifiers for Active Antennas: A Critical Review
نویسنده
چکیده
منابع مشابه
InP-based Complementary HBT Amplifiers for use in Communication Systems
This paper addresses a method to improve the linearity characteristics of power amplifiers by developing a PNP HBT technology and combining the PNP HBTs with NPN HBTs in a push-pull amplifier. InP-based PNP HBTs were fabricated with hfe > 30, BVECO = 5.6 , and fT and fmax of 11 and 31 GHz, respectively, which is the best reported for InAlAs/InGaAs PNP HBTs. Common-collector push-pull amplifiers...
متن کاملA Novel Design in the Use of Planar Transformers for LDMOS Based Amplifiers in Bands II, III, DRM+, DVB-T and DAB+
The coaxial transformer-coupled push-pull circuitry has been used widely in HF and VHF amplifiers for many decades without significant changes in the topology of the transformers. Basic changes over the years concerned the construction and turns ratio of the transformers as has been imposed upon the newer technologies active devices demands. The balun transmission line transformers applied in p...
متن کاملIntegrated-Antenna Push–Pull Power Amplifiers
In this paper, the integrated-antenna concept is applied to push–pull power amplifiers (PA’s). In this approach, the antenna serves as an out-of-phase power combiner and tuned load for higher harmonics. This new architecture effectively has a near-zero loss output hybrid, and results in a high-efficiency PA. The first example is a narrow-band push–pull amplifier integrated with a dual-feed patc...
متن کاملبررسی نظام تولید و توزیع فرش‌دستباف به منظور ارائه راهکار مناسب با تکیه بر تبدیل نظام فشاری (Push) به نظام کششی (Pull)
This article is trying to study production and distribution system based on providing value chain with the aim of identifying production & distribution system of hand-made carpet firstly; and studying the feasibility of changing from the push system to the pull system regarding the viewpoints of the elite and expert, secondly. In order to achieve this goal, the descriptive method of research ha...
متن کاملA 2.7-kW, 29-MHz Class-E/Fodd Amplifier with a Distributed Active Transformer
A Class-E/Fodd high power amplifier (PA) using the distributed active transformer (DAT) is demonstrated at 29MHz. The DAT combines the output power from four VDMOS push-pull pairs. The zero voltage switching (ZVS) condition is investigated and modified for the Class-E/Fodd amplifier with a non-ideal output transformer. All lumped elements including the DAT and the transistor package are modeled...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2013