Production and Characterization of Stainless Steel Based Fe-Cr-Ni-Mn-Si(-CO) Shape Memory Alloys
نویسندگان
چکیده
It is well known that the Fe based alloys can exhibit shape memory effect due to the y to E martensitic transformation. The effect may not be as striking as observed in the NiTi alloy but it might become attractive fkom the practical point of view. In this work, two compositions of Fe-Cr-Ni-Mn-Si(-Co) stainless steel based shape memory alloy, prepared by the VIM technique, will be presented. The results are good with shape recovery of 95% for a pre-strain of 4% after some training cycles. In terms of workability the alloys produced are worse than the usual AISI304. However, adjusting the thermo-mechanical processing, it is perfectly possible to produce wire as thin as 1,20mm in dia. or down.
منابع مشابه
The Effect of Mn-Depleted Surface Layer on the Corrosion Resistance of Shape Memory Fe-Mn-Si-Cr Alloys
In this work, we have examined Fe-Mn-Si-Cr alloys possessing a good shape memory effect due to a high Mn content (28 wt pct). The addition of Cr (5 wt pct) was made in order to give fairly good corrosion resistance to the alloy. But we have verified that even in moderately corrosive environments, the presence of chromium does not bear any passivation. On the other hand, we have found that the a...
متن کاملFerromagnetic shape memory alloys: Alternatives to Ni–Mn–Ga
This paper intends to review the state-of-the-art in the field of ferromagnetic shape memory alloys different than Ni–Mn–Ga, developed in the ast years. It starts with the effects of additions of different fourth elements to Ni–Mn–Ga and continues with the review of other Heusler (or B2) i-based and Co-based alloy systems, like Ni–Mn–X, Ni–Fe–Ga, Co–Ni–Al and Co–Ni–Ga alloys. Finally, ferromagn...
متن کاملThe X-Ray and SF-ICP-MS Analysis of Content and Release of Allergenic Metals from Body Piercing
Metallic piercing which have lack of resistance to sweat corrosion might be able to release metallic ions in the local tissue producing adverse effects in the human body, including allergic contact dermatitis (ACD). The aim of this study was double: 1) the metallic characterization of piercings and 2) the release of metals (Al, Co, Cr, Cu, Fe, Ir, Mn, Ni, Pd, Pt, Rh, Ti, V and Zn) in artificial...
متن کاملOptical Microscope Study of the y ( FCC ) we ( HC ) Martensitic Transformation of a Fe - 16 % Mn - 9 % Cr - 5 % Si - 4 % Ni Shape Memory Alloy
The y(FCC)tt&(HC) transformation is studied by light optical microscopy and scanning electron microscopy in a polycrystalline Fe-Mn-Si-Cr-Ni shape memory alloy. Thermal and stress-induced martensites are both studied to point out differences. A color etching method permitted to clearly observe morphological evolutions during the transformation and its reversion. Deformations of a golden microgr...
متن کاملFormation Process of Lamella Structures by Deformation in an Fe-Mn-Si-Cr-Ni Shape Memory Alloy
For Fe-Mn-Si-Cr-Ni shape memory alloys, it was previously found by HREM study that the formation of the nanometric lamella structures consisting of f.c.c. and h.c.p. phase is very important to exhibit good shape memory effect. In the present work, the formation process of such lamella structures has been studied in detail. The results are as follows. The transformation is initiated by random fo...
متن کامل