Aqueous-phase reforming of the low-boiling fraction of rice husk pyrolyzed bio-oil in the presence of platinum catalyst for hydrogen production.
نویسندگان
چکیده
Aqueous-phase reforming (APR) of the low-boiling fraction (LBF) of bio-oil from rice husk pyrolysis was investigated over Pt/Al(2)O(3) for hydrogen production. The influence of reaction temperature (503-563 K), reaction time (1-4h), different load of organics in water (3-12 wt.%) and catalyst amounts (0.25-1g) were studied. The hydrogen content of the gas products reached 65 vol.% at 533 K for 4h with a feedstock of 9.6g LBF and 30 mL water in the presence of 0.5 g of 2 wt.% Pt/Al(2)O(3). APR is a promising method to make use of the organics in LBF of bio-oil to produce hydrogen.
منابع مشابه
Oxidative desulfurization of light fuel oil by using hydrogen peroxide in the presence of acetic acid catalyst
Hydrogen peroxide as an oxidant agent was used for desulfurization of a petroleum hydrocarbon fraction (C10-C22) with boiling range of 175-375 ℃, (light fuel oil) in the presence of acetic acid as catalyst. The oxidation was performed in an ultrasonic bath. It is found that increasing the amount of hydrogen peroxide lead to increase the oxidation rate and so desulfurizatio...
متن کاملSustainable hydrogen production via reforming of bio-oil model compounds using a novel spouted bed reactor
Hydrogen produced from renewable energy sources can present significant environmental benefits as an alternative to fossil fuels or as a means for clean power generation via fuel cells. The aqueous fraction of bio oil can be used as a source for hydrogen production, if reformed in the presence of active catalytic materials. Recently, we introduced the concept of the spouted bed reactor for the ...
متن کاملA Novel Study of Upgrading Catalytic Reforming Unit by Improving Catalyst Regeneration Process to Enhance Aromatic Compounds, Hydrogen Production, and Hydrogen Purity
Catalytic reforming is a chemical process utilized in petroleum refineries to convert naphtha, typically having low octane ratings, into high octane liquid products, called reformates, which are components of high octane gasoline. In this study, a mathematical model was developed for simulation of semi-regenerative catalytic reforming unit and the result of the proposed model was compared with ...
متن کاملHydrogen production by steam reforming of dimethyle ether over Cu/ZnO/Al2O3 and H-ZSM-5 catalysts: An experimental and modeling study
Hydrogen was produced by steam reforming of dimethyl ether (DME) using a physical mixture of commercial HZSM-5 zeolite (for DME hydrolyzing) and Cu/ZnO/Al2O3 (for methanol steam reforming) as a catalyst in a fixed bed reactor. The experiments were performed at atmospheric pressure and in a temperature range from 270 to 310 °C. The effects of feed temperature and gas hourly space velocity (GHSV)...
متن کاملPlatinum Extraction Modeling from Used Catalyst by Iodine Solutions
Platinum extraction from spent reforming catalysts in iodine solutions under atmospheric pressure at different temperatures, acid concentration, and iodine spices concentration, catalyst particle size, and impeller agitation speed have been studied in our group. In this system, platinum is oxidized from spent catalyst with I3¯ that is formed ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Bioresource technology
دوره 125 شماره
صفحات -
تاریخ انتشار 2012