3D Simulation of Prints for Improved Soft-Proofing
نویسندگان
چکیده
A display tool has been developed to perform simulation and three-dimensional rendering of prints in the quest towards achieving improved soft proofing capabilities. It was desired through this 3D simulation that the gloss and surface properties of hard-copy prints be represented on a display, which are absent in current 2D soft proofing workflows. The procedure is described along with the relevant historical work. The major components of the workflow are identified as: the gloss prediction model, and the representation of this gloss on a display using computer graphics rendering techniques. Psychophysical experiments were carried out to evaluate the usefulness of this 3D simulation over current 2D soft proofing technique.
منابع مشابه
A Multi-Ink Color-Separation Algorithm Maximizing Color Constancy
Current color-printing technologies may use three or more inks, e.g., CMY, CMYK, CMYKcm, CMYKGO, CMYKRGB. When the number of inks exceeds three, there is the usual color-management one-to-many mapping problem. Because the spectral properties of many modern inks are optimized for maximum color gamut and in some cases, black ink may not be used for pictorial images, many prints have poor color co...
متن کاملمقایسه نتایج شبیهسازی بلور فوتونی با استفاده از روش FDTD دوبعدی بهبودیافته و FDTD سهبعدی
The accuracy of improved two dimensional finite difference time domain method (2D FDTD) is verified by comparing with 3D FDTD method and experimental data. The optimized 60° photonic crystal waveguide bend, used in this study as a test case, is composed of InPGaAs/InP material and air holes and TE polarization is considered. The photonic crystal waveguide bend transmission data was measured...
متن کاملProof-to-Print Match: Effectiveness of Substrate-Corrected Colorimetric Aims in Soft Proofing
.............................................................................................................. vii Chapter 1: Introduction ......................................................................................... 1 Statement of the Problem .................................................................................. 1 Reason for Interest in the Study ..........................
متن کاملPrinted 3D coloured objects: 3D ink-jet prints colour properties and colour stability
3D ink-jet printing is an additive, powder-based rapid prototyping (RP) process. The 3D printing process described in this overview has been developed by ZCorporation and is based on an ink-jet printing technique. The 3D computer models, created by 3D scanning or in 3D CAD modelling software, are built layer by layer from the basic materials of powder and binders. Due to the basic build princip...
متن کامل3D Printed Models of Cleft Palate Pathology for Surgical Education
To explore the potential viability and limitations of 3D printed models of children with cleft palate deformity. BACKGROUND The advantages of 3D printed replicas of normal anatomical specimens have previously been described. The creation of 3D prints displaying patient-specific anatomical pathology for surgical planning and interventions is an emerging field. Here we explored the possibility ...
متن کامل