Plastic Buckling Simulation of Tubular Structures by Finite Element Limit Analysis
نویسنده
چکیده
This paper is concerned with numerical simulation of plastic modes of tubular structures. The simulation incorporates with finite element limit analysis based on the upper bound method and the minimization technique. The analysis considers sequential deformation of structures with work-hardening effects. The simulation results demonstrate plastic buckling is one of the collapse modes and occurs when the buckling load is smaller than other collapse loads in order for the plastic dissipation energy to be minimized.
منابع مشابه
Determination of Buckling Limit of Strain in Cold Roll Forming through Finite Element Analysis
In this study, Buckling Limit of Strain (B.L.S.) is introduced as one of the most important limiting factors in cold roll forming process. B.L.S. is calculated by the finite element procedure. Then for two particular processes with existing analysis and experimental results, B.L.S. has been determined and evaluated. LUSAS 12.3 is used for finite element analysis. The results show that when buck...
متن کاملDetermination of Buckling Limit of Strain in Cold Roll Forming through Finite Element Analysis
In this study, "Buckling Limit of Strain" (B.L.S.) is introduced as one of the most important limiting factors in cold roll forming process. B.L.S. is calculated by the finite element procedure. Then for two particular processes with existing analysis and experimental results, B.L.S. has been determined and evaluated. LUSAS 12.3 is used for finite element analysis. The results show that when bu...
متن کاملکمانش پوستههای استوانهای با گشودگی شبه بیضوی تحت فشار محوری
Understanding how a cutout influences the load bearing capacity and buckling behavior of cylindrical shells is fundamental in the design of structural components used in automobiles, aircrafts, and marine structures. In this article, simulation and analysis of steel cylindrical shells with various lengths, include quasi elliptical cutout, subjected to axial compression were systematically carri...
متن کاملA Simple Finite Element Procedure for Free Vibration and Buckling Analysis of Cracked Beam-Like Structures
In this study, a novel and very simple finite element procedure is presented for free vibration and buckling analysis of slim beam-like structures damaged by edge cracks. A cracked region of a beam is modeled using a very short element with reduced second moment of area (I). For computing reduced I in a cracked region, the elementary theory of bending of beams and local flexibility approach are...
متن کاملBuckling of Laminates with Multiple Through-the-Width Delaminations Using Spring Simulation Model
Delamination is one of the most common failure modes in composite structures. In particular, when the laminated composites are subjected to compressive loads, delamination becomes a constraint in the design process. In this study, the system is modeled as a plate supported by an elastic foundation. The elastic adhesive layer between the buckled sublaminates is represented by some parallel sprin...
متن کامل