Process Control of UV radiation In the Fiber Optic process industries
ثبت نشده
چکیده
The following describes some recent advances in UV spectroradiometry as required by the optical fiber manufacturing industry. The demands from fiber process engineers have presented some severe challenges in developing accurate and reliable UV measuring instruments. Such instruments are now available to provide both intensity and wavelength data in the form of UV spectral distribution analysis and monitoring in an easy to understand form.
منابع مشابه
Investigation of the Effect of Electron Beam Different Doses on Optical Dissipation in Fiber Optic
Measurement of ionizing radiation in various fields, such as environmental safety, industrial detection processes, radiation protection and medical is very important. Radiation dosimetry plays an important role in determining the amount of energy absorbed and the effects of radiation. Recent optical fiber sensors have been shown to be radiation dosimeters. Our goal here is to investigate the ef...
متن کاملSolar ultraviolet radiation on the ground level of Isfahan
Introduction: Ultraviolet (UV) radiation affects human organs such as skin, eyes and immune system, as well as animals and plants. The main natural source of UV radiation is the Sun. To study the effects of solar UV radiation there is a need to quantify variations of solar energy received on the earth surface at different intervals. Materials and Methods: To measure UV radiation a broadband fib...
متن کاملبررسی کارایی فرایند اکسیداسیون فتوشیمیایی اشعه ماورای بنفش با پراکسید دی سولفات در حذف رنگ Alizarin Reds از محلولهای آبی
Introduction and purpose: Treatment of dye wastewater produced by textile industries is a major challenge for the environment. About 15% of the total produced dyes in the world are released in sewages during dyeing activities. Alizarin red S (ARS), a synthetic dye produced from Alizarin sulfonate is the most widely used dye in the textile industry. The aim of this study was ...
متن کاملEfficiency of Photo-Fenton Process in Degradation of 2-Chlorophenol
Background & Aims of the Study: Phenolic compounds have been extensively used in industries for applications such as petrochemical, oil refineries, papers, plastics, steel, pharmaceuticals, textiles, coal conversion, and so on. Specified amounts of Phenolic compounds are lost in the process of their manufacturing and utilization and often cause environmental pollution problems....
متن کاملبررسی کارایی فرایند H2O2/UV در حذف آلکیل بنزن سولفونات خطی (LAS) از محلول های آبی
Backgrounds and Objective: Surfactants are one of the largest pollutants which exist in urban and industrial wastewaters. Large quantities of surfactants have entered to the environment since last decade due to increased use of synthetic detergent in industrial and home consumptions.In this study, the efficiency of UV/H2O2 process in removal of linear alkylbenzane sulfonate (LAS) from aqueous s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2006