Nox REDUCTION BY USING UREA INJECTION AND MARINE FERROMANGANESE NODULE AS SCR OF A DIESEL ENGINE FULLED WITH PONGAMIA PINNATA METHYL ESTER

نویسندگان

  • S. N. Chaudhuri
  • D. Dutta
چکیده

Pongamia pinata methyl ester (PPME) is chosen as alternative fuel for diesel engines. It is renewable and offer potential reduction in CO; HC and smoke emissions due to higher O2 contents in it compared to diesel fuel but higher nitrogen oxides (NOx) emission. Nitrogen oxides (NOx) in the atmosphere cause serious environmental problems, such as photochemical oxidant, acid rain, and global warming. The removal of nitrogen oxides (NOx) from the exhaust of diesel engines is still a very challenging problem even though there have been many studies. Technologies available for NOx reductions either enhance other polluting gas emissions or increase fuel consumption. Injection of aqueous solutions of urea in the tail pipe of a diesel engine fuelled with Pongamia pinata methyl ester (PPME) for the reduction of oxides of nitrogen (NOx) was carried out in a four stroke, single cylinder, water cooled, constant speed diesel engine. Four observations were made for various concentration of urea solution 0%, 10%, 20%, and 30% by weight with different flow rates of urea solution as reductant by fitting Marine Ferromanganese nodule as SCR catalyst which improves the chemical reactions. 64% NOx reduction achieved with the urea flow rate 0.60 lit/hr, 30% concentration of urea solution and marine ferromanganese nodule as SCR.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of Direct Injection Diesel Engine Convert to Sequential Injection CNG Engine in Intake Port Gas Flow Pressure Profile

The one dimension computational model of a sequential injection engine, which runs on compressed natural gas (CNG) with spark ignition, is developed for this study, to simulate the performance of gas flow pressure profile, under various speed conditions. The computational model is used to simulate and study of the steady state and transient processes of the intake manifold. The sequential injec...

متن کامل

An Experimental Investigation of Diesel Engines Fuel Injection Pressure Effect on Power Performance and Fuel Consumption

The objective of this paper is to investigate the effect of fuel injection pressure on power performance and fuel consumption of diesel engine. In a diesel engine, fuel injection pressure is an important aspect of the engines’ power performance in order to obtain combustion treatment. The experiments in this paper are performed on a four-cylinder two-stroke direct injection diesel engine. The d...

متن کامل

Expert System for Diagnosis and Optimisation of Marine Diesel Engines

Original scientific paper The doctoral, thesis: “Expert System for Diagnosis and Optimisation of Marine Diesel Engines” is the result of many years of extensive practical and theoretical work on problems in the field of testing marine diesel engines and incorporating new technology during diagnosis. This work deals with problems of a complex analysis and testing a system of Diesel engine parame...

متن کامل

Analysis of air injection system for drag reduction in high speed vessels using numerical simulation software ANSYS-Fluid Flow

Many existing phenomena in nature are considered new design ideas in various fields of industry. Bionics is the application of biological methods and systems found in nature to the study and design of engineering systems and modern technology. By performing bionic review, the researchers found the penguins by delivering air locked under their wings and creating air bubbles, the drag significant...

متن کامل

Performance Prediction of a Faulty Marine Diesel Engine under Dif- Ferent Governor Settings

Various methods are proposed in literature for the engine faults detection, based on the combination of simulation models with measured engine data. In order to be effective, these methods must be based, in author’s opinion, on detailed, reliable and validated simulation models, able to predict the faulty engine performance, by reproducing its actual work conditions. This is particularly import...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013