Research on the Strength of Roadheader Conical Picks Based on Finite Element Analysis
نویسندگان
چکیده
This paper presents finite element analysis of the strength of roadheaher conical picks. Failure forms of conical picks are investigated, and the FE model of conical pick is established based on ANSYS. The static analysis is carried out according to the load calculated by empirical formula and the deformation map and stress distribution are obtained. The results show that the maximum stress of conical pick appeared in the tool bit. In order to examine the result of static analysis, contact analysis of conical pick cutting process is researched and a consistency is achieved. The finite element analysis not only offers a new way of studying the strength of conical picks and improving the service life of the pick but also provides a reliable theoretical basis for the selection, design and use of the conical picks.
منابع مشابه
Research on Strength of Roadheader Conical Picks Based on Finite Element Analysis
This paper presents finite element analysis of the strength of roadheaher conical picks. Failure forms of conical picks are investigated, and the FE model of conical pick is established which is based on ANSYS. The static analysis is carried out according to the load calculated by empirical formula and the deformation map and stress distribution is obtained. The results show that the maximum st...
متن کاملPrediction of Human Vertebral Compressive Strength Using Quantitative Computed Tomography Based Nonlinear Finite Element Method
Introduction: Because of the importance of vertebral compressive fracture (VCF) role in increasing the patients’ death rate and reducing their quality of life, many studies have been conducted for a noninvasive prediction of vertebral compressive strength based on bone mineral density (BMD) determination and recently finite element analysis. In this study, QCT-voxel based nonlinear finite eleme...
متن کاملLocal Imperfection Effects on Thermal Buckling Behavior of Composite Fiber Reinforced Truncated Conical Liner
Thermal buckling behavior of truncated conical liner reinforced by laminated composite is investigated in the presence of a general initial imperfection. For this purpose, the method of virtual work and first-order strain-deformation shell theory are employed to extract equilibrium equations. To this end, a finite element code is developed using the 3D 8-node shell element with six degrees of f...
متن کاملStress Analysis of Rotating Thick Truncated Conical Shells with Variable Thickness under Mechanical and Thermal Loads
In this paper, thermo-elastic analysis of a rotating thick truncated conical shell subjected to the temperature gradient, internal pressure and external pressure is presented. Given the existence of shear stress in the conical shell due to thickness change along the axial direction, the governing equations are obtained based on first-order shear deformation theory (FSDT). These equations are so...
متن کاملImpact of Tamper Shape on the Efficiency and Vibrations Induced During Dynamic Compaction of Dry Sands by 3D Finite Element Modeling
Dynamic compaction is a soil improvement method which has been widely used for the increase of bearing capacity through stress wave propagation during heavy tamping. The cost and time of project implementation can be effectively curtailed by developing a model that can be used in the design of dynamic compaction operations. The numerical models offered so far are mostly one or two-dimensional, ...
متن کامل