Comparison of 4×1 SIMO and 2×2 MIMO sensors based on measured propagation channels

نویسندگان

  • Keita Ushiki
  • Kentaro Nishimori
  • Naoki Honma
چکیده

High-speed transmission technologies using array signal processing such as Single Input Multiple Output/ Multiple Input Multiple Output (SIMO/MIMO) have been recently attracted much attention due to smart phones and wireless LAN systems. High data transmission can be realized by utilizing accurate channel state information (CSI). However, it is well known that the characteristic of SIMO/MIMO performance is severely degraded by variation of the propagation channel [1].

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Intruder Detection Performance of SIMO and MIMO Sensors with Same Number of Channel Responses

Intruder detection method by utilizing a time variation of Multiple Input Multiple Output (MIMO) channel (MIMO Sensor) has been proposed. Although the channel capacity on the MIMO transmission is severely degraded in time variant channels, we can take advantage of this feature in MIMO Sensor applications. We have already demonstrated the effectiveness of 2×2 MIMO sensor using 2.4 GHz band at a ...

متن کامل

MIMO channels from multipath parameter extraction vs. direct measurements

This paper presents a capacity based analysis of directional Multiple-Input MultipleOutput (MIMO) channel measurements that were conducted with (16 x 16) element Uniform Circular Arrays (UCA) of patch antennas. The effect of antenna array configuration on performance has been investigated. A comparison between directly measured MIMO channels and MIMO channels generated from the multipath parame...

متن کامل

Performance of Turbo coded OFDM wireless link for SISO, SIMO, MISO and MIMO system

This paper compares the performance of a Turbo coded OFDM wireless link for SISO, SIMO, MISO and MIMO system with uncoded OFDM wireless link for SISO, SIMO, MISO and MIMO system in the in the presence of rayleigh fading. Turbo encoder encodes the input information bits and sends to QPSK or 16 QAM or 64 QAM modulator. Modulated symbols are mapped by STBC. Outputs of STBC are split into n streams...

متن کامل

Frequency correlation characteristics for broadband MIMO systems in indoor NLOS propagation environment

1. INTRODUCTION Due to the recent popularity of mobile phones and broadband wireless LANs, broadband wireless systems employing Orthogonal Frequency Division Multiplexing (OFDM) signals were introduced to combat the effects of multi-path fading in indoor wireless LAN systems. Moreover, Multiple Input Multiple Output (MIMO) is incorporated into these broadband wireless systems using OFDM signals...

متن کامل

Models for MIMO propagation channels: a review

SUMMARY This paper reviews recently published results on multiple input multiple output (MIMO) channel modeling. Both nar-rowband and wideband models are considered. We distinguish between two main approaches to MIMO channel modeling, namely, physically based and non-physically based modeling. The non-physical models primarily rely on the statistical characteristics of the MIMO channels obtaine...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012