Characteristics of transitional multicomponent gaseous and drop-laden mixing layers from direct numerical simulation: Composition effects
نویسندگان
چکیده
Transitional states are obtained by exercising a model of multicomponent-liquid MC-liquid drop evaporation in a three-dimensional mixing layer at larger Reynolds numbers, Re, than in a previous study. The gas phase is followed in an Eulerian frame and the multitude of drops is described in a Lagrangian frame. Complete dynamic and thermodynamic coupling between phases is included. The liquid composition, initially specified as a single-Gamma SG probability distribution function PDF depending on the molar mass, is allowed to evolve into a linear combination of two SGPDFs, called the double-Gamma PDF DGPDF . The compositions of liquid and vapor emanating from the drops are calculated through four moments of their PDFs, which are drop-specific and location-specific, respectively. The mixing layer is initially excited to promote the double pairing of its four initial spanwise vortices, resulting into an ultimate vortex in which small scales proliferate. Simulations are performed for four liquids of different compositions, and the effects of the initial mass loading and initial free-stream gas temperature are explored. For reference, simulations are also performed for gaseous multicomponent mixing layers for which the effect of Re is investigated in the direct-numerical-simulation–accessible regime. The results encompass examination of the global layer characteristics, flow visualizations, and homogeneous-plane statistics at transition. Comparisons are performed with previous pretransitional MC-liquid simulations and with transitional single-component SC liquid-drop-laden mixing layer studies. Contrasting to pretransitional MC flows, the vorticity and drop organization depend on the initial gas temperature, this being due to drop/turbulence coupling. The vapor-composition mean molar mass and standard deviation distributions strongly correlate with the initial liquid-composition PDF. Unlike in pretransitional situations, regions of large composition standard deviation no longer necessarily coincide with those of large mean molar mass. The rotational and composition characteristics are all liquid-specific and the variation among liquids is amplified with increasing free-stream gas temperature. The classical energy cascade is found to be of similar strength, but the smallest scales contain orders of magnitude less energy than SC flows, which is confirmed by the larger viscous dissipation for MC flows. The kinetic energy and dissipation are liquid-specific and the variation among liquids is amplified with increasing free-stream gas temperature. The gas composition, of which the first four moments are calculated, is shown to be close to, but distinct from, a SGPDF. Eulerian and Lagrangian statistics of gas-phase quantities show that the different observation framework may affect the perception of the flow. © 2007 American Institute of Physics. DOI: 10.1063/1.2734997
منابع مشابه
Direct injection of methane in advanced propulsion systems: effects of thermodynamic conditions
The direct injection of gaseous fuels involves the presence of under-expanded jets due to the high pressure-ratios and the strong gas compressibility. Understanding the physical development of such processes is essential for developing Direct Injection (DI) devices suitable for application in internal combustion engines fueled by methane or hydrogen. In this work a coupled experimental-numerica...
متن کاملConversion of Diesel Engine to Port Injection CNG Engine Using Gaseous Injector Nozzle Multi Holes Geometries Improvement: A Review
This paper is the representation of the computational and experimental methods of a new injector nozzle for a sequential port injection CNG engine. The objective of this study was to review the previous research in the development of gaseous fuel injector for port injection CNG engine converted from diesel engine. Next, a simulation of the fuel flow of the new injector nozzle was made using FLU...
متن کاملThree-Dimensional Direct Numerical Simulation of Surface-Tension-Gradient Effects on the Leveling of an Evaporating Multicomponent Fluid
Mathematical and numerical modeling of drying coating layers is of interest to both industrial and academic communities. Compositional changes that occur during the drying process make the implementation of practical and efficient numerical models rather difficult. In this paper we present a three-dimensional mathematical and numerical model based on the lubrication approximation for the flow o...
متن کاملNumerical Simulation of Separation Bubble on Elliptic Cylinders Using Three-equation k-? Turbulence Model
Occurrence of laminar separation bubbles on solid walls of an elliptic cylinder has been simulated using a recently developed transitional model for boundary layer flows. Computational method is based on the solution of the Reynolds averaged Navier-Stokes (RANS) equations and the eddy-viscosity concept. Transitional model tries to simulate streamwise fluctuations, induced by freestream turbulen...
متن کاملGas Mixing Simulation in a T-Shape Micro Channel Using The DSMC Method
Gas mixing in a T-shape micro mixer has been simulated using the Direct Simulation Monte Carlo (DSMC) method. It is considered that the adequate mixing occurs when the mass composition of the species, CO or N2, deviates below 1 % from their equilibrium composition. The mixing coefficient is defined as the ratio of the mixing length to the main channel’s height. As the inlet Kn increases, while ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2007