Oscillation Test Structures of Active Rc Filters
نویسنده
چکیده
Design-for-test modiications of diierent types of active RC lter stages for the oscillation-based testing are proposed. Additional switches or a feedback loop network are employed. The rst solution ooers the possibility of a simple built-in test implementation while the second is more applicable to the use of an external tester.
منابع مشابه
Oscillation-test methodology for low-cost testing of active analog filters
The oscillation-test strategy is a low cost and robust test method for mixed-signal integrated circuits. Being a vectorless test method, it allows one to eliminate the analog test vector generator. Furthermore, as the oscillation frequency is considered to be digital, it can be precisely analyzed using pure digital circuitry and can be easily interfaced to test techniques dedicated to the digit...
متن کاملSwitched-Resistor Filters-A Continuous Time Approach to Monolithic MOS Filter Design
Absfruct-A method of designing continuous-time active RC filters which employ only capacitors and FET transistors is presentedl. The effective RC time constants of these filters are determined by capacitor ratios. The filters employ switched resistors. These filters can uric any existing active RC or passive RC topology as the basis for the design and inherit the sensitivity properties of the c...
متن کاملEXPERIMENTS WITH IEEE 1149.4 KLIC TEST CHIP A Case Study
The paper presents some results of the experiments with IEEE 1149.4 KLIC Test Chip in the area of active RC filters implemented in thick-film hybrid technology. The influence of analog boundary modules (ABMs) on circuit performance is analysed in the case study of active RC notch filter. INTRODUCTION In this paper we present some results of the experiments with IEEE 1149.4 KLIC Test Chip in the...
متن کاملTunable RC-Active Filters Using Periodically Switched Conductances
The realization of electronically tunable RC-active filters is achieved by the use of periodically switched conductances within the filter. A method of analysis of RC networks containing periodically switched conductances is given, which is based on the impulse response of the network at a capacitance. The use of periodically switched conductances to tune RC-active filters has several practical...
متن کاملLow-noise low-power allpole active-RC filters minimizing resistor level
The design procedure of 2and 3-order low-sensitivity lowpower allpole active resistance-capacitance (RC) filters, using the impedance tapering design method has already been published. Beside sensitivity minimization the impedance tapering was used for output noise minimization and output dynamic range maximization. In this paper it is shown that active resistance-capacitance (RC) filters can a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1997