A portable quartz micro balance for physical vapor deposition techniques.
نویسندگان
چکیده
A portable quartz crystal micro balance for physical vapor deposition techniques is presented. The device is used for the calibration of evaporators employed in the preparation of thin film systems that are studied in surface science. The design is based upon a portable sample setup, highly versatile and customizable. It can be transported within an ultrahigh vacuum system, stored in a sample garage and be used in front of different evaporators. Details of the setup are described. Finally, the performance of the device is demonstrated and compared to scanning tunneling microscopy measurements.
منابع مشابه
Evaluation of Vapor Deposition Techniques for Membrane Pore Size Modification
The suitability of three vapor deposition techniques for pore size modification was evaluated using polycarbonate track etched membranes as model supports. A feature scale model was employed to predict the pore geometry after modification and the resulting pure water flux. Physical vapor deposition (PVD) and pulsed plasma-enhanced chemical vapor deposition (PECVD), naturally, form asymmetric na...
متن کاملThickness Measurement Methods for Physical Vapor Deposited Aluminum Coatings in Packaging Applications: A Review
The production of barrier packaging materials, e.g., for food, by physical vapor deposition (PVD) of inorganic coatings such as aluminum on polymer substrates is an established and well understood functionalization technique today. In order to achieve a sufficient barrier against gases, a coating thickness of approximately 40 nm aluminum is necessary. This review provides a holistic overview of...
متن کاملComparison of Properties of Ti/TiN/TiCN/TiAlN Film Deposited by Cathodic Arc Physical Vapor and Plasma-assisted Chemical Vapor Deposition on Custom 450 Steel Substrates
This study investigated the effects of deposition techniques on the microstructural and tribological properties of Ti/TiN/TiCN/TiAlN multilayer coatings onto a Custom 450 steel substrate. The coatings were produced using cathodic arc physical vapor deposition (CAPVD) and plasma-assisted chemical vapor deposition (PACVD). The microstructural of the coatings was evaluated using (SEM), and phase f...
متن کاملChemical Deposition of Zinc Hydroxosulfide thin Films from Zinc (II) - Ammonia-Thiourea Solutions
The growth of ZnS films from ammonia solutions using thiourea as a sulfur precursor has been investigated. In situ growth kinetic studies have been performed by means of the quartz crystal microbalance (QCM) technique. The experiments have been canied out in pH buffered conditions (pH= 11) and the effect of the addition of amines has been investigated. The film are characterized by various tech...
متن کاملAn rf sustained argon and copper plasma for ionized physical vapor deposition of copper
Langmuir probe, optical emission spectroscopy, and biased quartz crystal microbalance measurements were used to investigate an argon and copper plasma used for ionized physical vapor deposition of copper. Copper vapor generated by a magnetron sputter discharge is ionized upon passing through an argon discharge excited by an internal rf induction antenna. Argon plasma characteristics such as ele...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- The Review of scientific instruments
دوره 84 8 شماره
صفحات -
تاریخ انتشار 2013