Unusual secondary electron emission behavior in carbon nanotube forests.
نویسندگان
چکیده
Electron yield was measured from patterned carbon nanotube forests for a wide range of primary beam energies (400-20,000 eV). It was observed that secondary and backscattered electron emission behaviors in these forests are quite different than in bulk materials. This seems to be primarily because of the increased range of electrons due to the porous nature of the forests and dependent on their structural parameters, namely nanotube length, diameter and inter-nanotube spacing. In addition to providing insight into the electron microscopy of nanotubes, these results have interesting implications on designing novel secondary electron emitters based on the structural degrees of freedom of nanomaterials.
منابع مشابه
Electron field emission from transparent multiwalled carbon nanotube sheets for inverted field emission displays
Strong, conducting, transparent carbon nanotube sheets were prepared by solid-state draw from well-ordered, aligned multiwalled carbon nanotube (MWCNT) forests [Zhang et al., 2005] [1]. Study of electron field emission from such transparent MWCNT sheets shows threshold fields of less than 0.5 V/lm with current densities high enough for display applications. Step-like field emission current incr...
متن کاملScreened field enhancement factor for the floating sphere model of a carbon nanotube array
Related Articles Field-emission-assisted approach to dry micro-electro-discharge machining of carbon-nanotube forests J. Appl. Phys. 110, 103305 (2011) The hysteresis phenomenon of the field emission from the graphene film Appl. Phys. Lett. 99, 173104 (2011) Temperature dependence of the field emission from the few-layer graphene film Appl. Phys. Lett. 99, 163103 (2011) Atomic layer coating of ...
متن کاملElectrochemistry at carbon nanotube forests: sidewalls and closed ends allow fast electron transfer.
The electrochemical properties of the closed ends and sidewalls of pristine carbon nanotube forests are investigated directly using a nanopipet electrochemical cell. Both are shown to promote fast electron transfer, without any activation or processing of the carbon nanotube material required, in contrast to the current model in the literature.
متن کاملSynthesis and Characterization of Anatase-coated Multiwall Carbon Nanotube for Improvement of Photocatalytic Activity
Sol-gel technique was used to coat multiwall carbon nanotubes (MWCNTs) with anatase titania to increasing the surface area and improve the photocatalytic activity of TiO2. Room temperature ballistic conduct of MWCNT combined with semiconducting behavior of anatase brought about a photocatalytic improvement of ~37 % with respect to the highest methyl orange decolorization flair. For characteriza...
متن کاملEffects of Nanotube/Matrix Interface on Multi-Walled Carbon Nanotube Reinforced Polymer Mechanical Properties
In this paper, experimental and Finite Element Methods have been used to determine mechanical properties of nanocomposites. Standard tensile and compression samples with 0.0, 0.15, 0.25, 0.35, 0.45, and 0.55 weight fraction of Multi-Walled Carbon Nanotube (MWCNT) were prepared and tested. Nanotube weight fraction was varied to investigate the effects of nanotube weight fraction on nanocomposite...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Scanning
دوره 31 6 شماره
صفحات -
تاریخ انتشار 2009