An H∞ LPV design for sampling varying controllers : experimentation with a T inverted pendulum
نویسندگان
چکیده
This paper deals with the adaptation of a realtime controller’s sampling period to account for the available computing resource variations. The design of such controllers requires a parameter-dependent discrete-time model of the plant, where the parameter is the sampling period. A polytopic approach for LPV (Linear Parameter Varying) systems is then developed to get an H∞ sampling period dependent controller. A reduction of the polytope size is here performed which drastically reduces the conservatism of the approach and makes easier the controller implementation. Some experimental results on a T inverted pendulum are provided to show the efficiency of the approach.
منابع مشابه
Parameter Reduction for Lpv Systems via Principal Components Analysis
This paper is concerned with the reduction of the number of parameters of LPV and quasi LPV models for the synthesis of LPV gain scheduling controllers. The number of parameters is reduced by the principal component analysis of typical scheduling trajectories. This method enables a systematic trade-off between the number of reduced parameters and the desired accuracy. The approach is illustrate...
متن کاملRobust H2 switching gain-scheduled controller design for switched uncertain LPV systems
In this article, a new approach is proposed to design robust switching gain-scheduled dynamic output feedback control for switched uncertain continuous-time linear parameter varying (LPV) systems. The proposed robust switching gain-scheduled controllers are robustly designed so that the stability and H2-gain performance of the switched closed-loop uncertain LPV system can be guaranteed even und...
متن کاملMINIMUM TIME SWING UP AND STABILIZATION OF ROTARY INVERTED PENDULUM USING PULSE STEP CONTROL
This paper proposes an approach for the minimum time swing upof a rotary inverted pendulum. Our rotary inverted pendulum is supported bya pivot arm. The pivot arm rotates in a horizontal plane by means of a servomotor. The opposite end of the arm is instrumented with a joint whose axisis along the radial direction of the motor. A pendulum is suspended at thejoint. The task is to design a contro...
متن کاملStabilization of the Inverted Pendulum with Backlash Using $H_{infty}$-LMI Technique
The rotary inverted pendulum, also named Furuta Pendulum, has been studied extensively for control performance evaluation in under-actuated mechanisms. The H∞ control invoking Linear Matrix Inequality (H∞-LMI) has been also wide employed for linear control design. This paper deals with the feasibility ofH∞-LMI technique to stabilize the rotary inverted pendulum around its unstable equilibrium p...
متن کاملReal Time Control of Inverted Pendulum using FPGA
The Inverted Pendulum is one of the most important classical problems of Control Engineering. In this paper, a real-time control for stabilization of inverted pendulum is developed using PID controller. The implementation platform chosen here is FPGA because it exhibits some superior qualities over traditional processors such as parallel processing capability, high sampling rates, flexibility i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2009