An Offset - Charge Independent Single - Electronics Rs Flip - Flop

نویسنده

  • J. E. MOOIJ
چکیده

Single-electronics circuits can detect charges much smaller than the charge of an electron. This enables phenomenally precise charge measurements but it also means that charged defects (often referred to as offset charges) can disrupt device operation. It has been suggested that large scale integration of single-electron devices could be used to construct fast logic circuits with a high device packing density. It small circuits, the offset charges are tuned away by applying voltages to a number of gates. In large circuits, it is impractical to tune the offset charges by coupling a gate to every device. Since the complete elimination of offset charges is probably impossible, offset-charge independent circuits must be developed. Here an offsetcharge independent RS flip-flop is described. This circuit is equivalent to a static RAM memory cell. Although the flip-flop is offset-charge independent, it does occasionally forget the information that was stored in it.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

High-performance and Low-power Clock Branch Sharing Pseudo-NMOS Level Converting Flip-flop

Multi-Supply voltage design using Cluster Voltage Scaling (CVS) is an effective way to reduce power consumption without performance degradation. One of the major issues in this method is performance and power overheads due to insertion of Level Converting Flip-Flops (LCFF) at the interface from low-supply to high-supply clusters to simultaneously perform latching and level conversion. In this p...

متن کامل

The equations of the ideal latches

The latches are simple circuits with feedback from the digital electrical engineering. We have included in our work the C element of Muller, the RS latch, the clocked RS latch, the D latch and also circuits containing two interconnected latches: the edge triggered RS flip-flop, the D flip-flop, the JK flip-flop, the T flip-flop. The purpose of this study is to model with equations the previous ...

متن کامل

A new low power high reliability flip-flop robust against process variations

Low scaling technology makes a significant reduction in dimension and supply voltage, and lead to new challenges about power consumption such as increasing nodes sensitivity over radiation-induced soft errors in VLSI circuits. In this area, different design methods have been proposed to low power flip-flops and various research studies have been done to reach a suitable hardened flip-flops. In ...

متن کامل

A 5.3 GHz Programmable Divider for HiPerLAN in 0.25 m CMOS

A 5.3 GHz low voltage CMOS frequency divider whose modulus can be varied from 220 to 224 is presented. Programmability is achieved by switching between different output phases of a D flip-flop (DFF). An improved glitchfree phase switching technique through the use of a retimer circuit is introduced. A high speed low voltage DFF circuit is given. The programmable divider fabricated in m technolo...

متن کامل

The Use of A Simple Methodology for Flip Flop Conversion as an Aid in Teaching Synchronous Sequential Circuits in a Digital Systems Design Course

Most digital systems textbooks treat the topic of converting one flip flop to another by simply giving the student certain simple conversion circuits, such as the use of an inverter between the R and S inputs of an RS flip flop to form a D flip flop, or tying together the inputs of a JK flip flop to make a T flip flop. However, a more general, but very simple, methodology for flip flop conversi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 1997