Chemical sensor project

نویسندگان

  • Frederic LOIZEAU
  • Thomas JARAMILLO
  • Beth PRUITT
چکیده

Introduction The electrochemical gas sensor project is now at a state were the results of the first test pointed out the different needs for improvement and optimization both of the fabrication process and the testing. This report will focus on this sensor, detail the obtained results for CO sensing, and list the different feedbacks obtained. All those information will help building a second generation of electrochemical gas sensors.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The Possibility of Selective Adsorption and Sensing of the Noble Gaseous Species by the C20 Fullerene, the Graphene Sheets, and the N4B4 Cluster

There are only a handful reports about the sensor systems having the ability of detecting the existence of the noble gases. Chemical reluctance of these gaseous species causes them to have no chemical interactions like hydrogen bonding with the chemically designed nano-sized sensors. Noble gasses usually have no atomic charges nor do change the total polarity of the molecular sensor systems. Th...

متن کامل

The Effects of Excitation Signal on the Resolution of the Liquid Crystal Capacitive Chemical and Biological Sensors

In this paper excitation characteristics of the Liquid Crystal (LC) capacitive chemical and biological sensor are examined and the optimum frequency and voltage range for the sensor interface are introduced. Interdigitated capacitor has been used for the sensor capacitance measurement and two different molecular orientations, homeotropic and homogenous, have been considered. The LC sensor capac...

متن کامل

Optical Analyzer for Continuous Monitoring of Dissolved Oxygen in Aviation Fuel and Other Non-aqueous Media

A special sensitive element based on the novel composite material was created. The sensor has a linear calibration and is resistant to aliphatic hydrocarbons, in particular aviation fuel. A low cost and easy-to-implement method for calibrating the sensor was proposed. Temperature dependence of the oxygen mass transfer coefficient kL was measured for aviation fuel TS-1 (Russi...

متن کامل

Specific Fast Response CH4 Gas Sensor Based on Metal Oxide, Tungsten Carbide /SnO2Core-Shell Modified Interdigitated Electrode

In this study, a specific CH4 sensor is fabricated based on interdigitated electrode that modified with core-shell of tungsten carbide/tin oxide (WC/SnO2) nanoparticles by wet chemical method in different percents of carbon and tungsten. The morphology of wet chemical-synthesized WC/SnO2 core-shell was evaluated by different methods such as patterned X-ray d...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015