Measurement of Bremsstrahlung Dependent on Stored Beam Current
نویسنده
چکیده
Bremsstrahlung was measured as a function of stored beam current using the BGO scintillation spectrometer at the compact superconducting storage ring of Ritsumeikan University. Bremsstrahlung is emitted for collision of stored electrons and residual gas on the beam orbit. Yield of bremsstrahlung depend on stored beam current and residual gas density. We tried to determine gas density on the beam orbit by present measurement.
منابع مشابه
Shielding simulations for safe use of curtain electron accelerator by MCNP4C
In an electron curtain accelerator, when the electron beam passes through the titanium exit window of the accelerator chamber, X-ray photons are produced as a negative by-product of retarding accelerated electrons. Controlling the produced X-ray photons to avoid their detrimental effects or in fact, proper shielding of the accelerator is an important issue that has to be considered in the use o...
متن کاملImpact of Gas Bremsstrahlung on Synchrotron Radiation Beamline Shielding at the Advanced Photon Source+
The Advanced Photon Source (APS) currently under construction at Argonne National Laboratory will be one of the world’s brightest synchrotron radiation facilities. The storage ring, capable of storing currents up to 300 mA at 7.0 GeV and 200 mA at 7.5 GeV, will produce very intense and energetic synchrotron radiation (Ec = 24 keV for bending magnets and Ec = 37.4 keV for wigglers, where Ec is t...
متن کاملAn assessment of the Photon Contamination due to Bremsstrahlung Radiation in the Electron Beams of a NEPTUN 10PC Linac using a Monte Carlo Method
Introduction: In clinical electron beams, most of bremsstrahlung radiation is produced by various linac head structures. This bremsstrahlung radiation dose is influenced by the geometry and construction of every component of the linac treatment head structures. Thus, it can be expected that the amount of the contaminated photon dose due to bremsstrahlung radiation varies among different linacs,...
متن کاملPulse Power Compression by Cutting a Dense Z-Pinch with a Laser Beam
A thin cut made through a z-pinch by an intense laser beam can become a magnetically insulated diode crossed by an intense ion beam. For larger cuts, the gap is crossed by an intense relativistic electron beam, stopped by magnetic bremsstrahlung resulting in a pointlike intense x-ray source. In either case, the impedance of the pinch discharge is increased, with the power delivered rising in th...
متن کاملPhotoproduction of WH signal at electron-proton Colliders
We present the photoproduction of an intermediate mass Higgs (IMH) boson associated with a W boson at the future electron-proton colliders using bremsstrahlung photon beam or laser backscattered photon beam. With bremsstrahlung photon beam the search for the IMH boson is unfavorable because of the small signal rate. But with laser photon beam the search is viable due to a much larger rate, and ...
متن کامل