The asymptotic structure of a shear band in mode-II deformations
نویسندگان
چکیده
A shear band is assumed to propagate at a uniform velocity in a thermoviscoplastic body being deformed in mode-II. The deformation ®eld appears steady to an observer situated on and moving with the shear band tip. The region around the shear band tip is divided into a core region and an inertial region. The core region is behind the shear band tip, and the inertial region surrounds the band tip but excludes a small region around the tip. Asymptotic ®elds for the velocity, temperature and the eective stress are determined in the inertial region. The dependencies of the thermal width of the band and of the rate of energy dissipated within the core region behind the shear band-tip upon the speed of the shear band are exhibited. # 1999 Elsevier Science Ltd. All rights reserved.
منابع مشابه
بررسی عددی تأثیر خصوصیات خاک بر باندهای برشی
In some natural events such as soil failure the deformations are localized in narrow restrictions, which are called shear bands. This event which is a fundamental phenomenon in granular material, has been widely investigated during recent decades within expensive experimental tests and also some numerical simulations. Most of previously used numerical methods are based on continuum theories des...
متن کاملDual-Band Evanescent-Mode Substrate Integrated Waveguide Band-pass Filter for WLAN Applications
A new multi-layer substrate integrated waveguide (SIW) structure is developed to design dual-band evanescent-mode band-pass filters (BPFs). Two independent series LC circuits are implemented by incorporating metallic irises in the different layers of the structure. The combination of the metallic irises with capacitive-plates is embedded inside the SIW to independently excite two evane...
متن کاملShear-Flexural Interaction in Analysis of Reduced Web Section Beams using VM Link Element
Reduced web section beams in shear-yielding moment-resistant steel frames are used for energy dissipating of earthquakes. The finite element analysis indicates that failure mode of these beams are governed by the combination of shear force and flexural moment. Therefore the analysis of frames with reduced web section beams needs consideration of shear-flexural interaction in those sections. In ...
متن کاملA design of Rectangular Waveguide TM11 to TE10 Mode Converter for S-band Applications
A design of a compact, easy to fabricate and applicable structure rectangular waveguide TM11 to TE10 mode converter is presented in this paper. The design procedure of the proposed structure can be divided into two parts in sequence. The beginning one is dedicated to the transformation from TM11 to TEM mode using a central conductor, while the second part is the transformation from TEM to TE10 ...
متن کاملMicrostructural eects on shear instability and shear band spacing
A constitutive relation that accounts for the thermally activated dislocation motion and microstructure interaction is used to study the stability of a homogeneous solution of equations governing the simple shearing deformations of a thermoviscoplastic body. An instability criterion and an upper bound for the growth rate of the in®nitesimal deformations superimposed on the homogeneous solution ...
متن کامل