Modal Identification Study of Vincent Thomas Bridge Using Simulated Wind-Induced Ambient Vibration Data

In this article, wind-induced vibration response of Vincent Thomas Bridge, a suspension bridge located in San Pedro near LosAngeles, California, is simulated using a detailed three-dimensional finite element model of the bridge and a state-of-the-art stochastic wind excitation model. Based on the simulated wind-induced vibration data, the modal parameters (natural frequencies, damping ratios, and mode shapes) of the bridge are identified using the data-driven stochastic subspace identification method. The identified modal parameters are verified by the computed eigenproperties of the bridge model. Finally, effects of measurement noise on the system identification results are studied by adding zero-mean Gaussian white noise processes to the simulated response data. Statistical properties of the identifiedmodal parameters are investigated under an increasing level of measurement noise. The framework presented in this article will allow us to investigate the effects of various realistic damage scenarios in long-span cable-supported (suspension and cable-stayed) bridges on changes in modal identification results. Such studies are required to develop robust and reliable vibration-based structural health monitoring methods for this type of bridge, which is a long-term research objective of the authors. ∗To whom correspondence should be addressed. E-mail: jpconte@ ucsd.edu.