3D-printed phantom study for investigating stent abutment during gastroduodenal stent placement for gastric outlet obstruction

Background: Placing a self-expandable metallic stent (SEMS) is safe and effective for the palliative treatment of malignant gastroduodenal (GD) strictures. SEMS abutment in the duodenal wall is associated with increased food impaction, resulting in higher stent malfunction and shorter stent patency. The desire to evaluate the mechanism and significance of stent abutment led us to design an in vitro experiment using a flexible anthropomorphic three-dimensional (3D)-printed GD phantom model. Results: A GD phantom was fabricated using 3D printer data after performing computed tomography gastrography. A partially covered (PC) or fully covered (FC) stent was placed so that its distal end abutted onto the duodenal wall in groups PC-1 and FC-1 or its distal end was sufficiently directed caudally in groups PC-2 and FC-2. The elapsed times of the inflowing of three diets (liquid, soft, and solid) were measured in the GD phantom under fluoroscopic guidance. There was no significant difference in the mean elapsed times for the liquid diet among the four groups. For the soft diet, the mean elapsed times in groups PC-1 and FC-1 were longer than those in groups PC-2 and FC-2 (P = 0.018 and P < 0.001, respectively). For the solid diet, the mean elapsed time in group PC-1 was longer than that in group PC-2 (P < 0.001). The solid diet could not pass in group FC-1 due to food impaction. The mean elapsed times were significantly longer in groups FC-1 and FC-2 than in groups PC-1 and PC-2 for soft and solid diets (all P < 0.001). Conclusions: This flexible anthropomorphic 3D–printed GD phantom study revealed that stent abutment can cause prolonged passage of soft and solid diets through the stent as well as impaction of solid diets into the stent.