Risks of toxic ash from artisanal mining of discarded cellphones.
نویسندگان
چکیده
The potential environmental and human health impacts of artisanal mining of electronic waste through open incineration were investigated. A market-representative set of cellphones was dismantled into four component categories-batteries, circuit boards, plastics and screens. The components were shredded, sieved and incinerated at 743-818 °C. The concentrations of 17 metals were determined using U.S. EPA methods 6010C (inductively coupled plasma-atomic emission spectrometry; 6020A (inductively coupled plasma-mass spectrometry, or 7471B and 7470A (cold-vapor atomic absorption). EPA Method 8270 (gas chromatography/mass spectrometry) was used to identify polyaromatic hydrocarbon compounds and polybrominated diphenyl ethers. EPA Method 8082A was used to measure polychlorinated biphenyls and EPA Method 8290 was used for dioxin/furans in the residue ash. The life cycle assessment model USEtox(®) was used to estimate impacts of the ash residue chemicals on human health and the ecosystem. Among metals, copper in printed circuit boards had the highest ecotoxicity impact (1610-1930PAFm(3)/kg); Beryllium in plastics had the highest impact on producing non-cancer diseases (0.14-0.44 cases/kg of ash); and Nickel had the largest impact on producing cancers (0.093-0.35 cases/kg of ash). Among organic chemicals, dioxins from incinerated batteries produced the largest ecotoxicological impact (1.07E-04 to 3.64E-04PAFm(3)/kg). Furans in incinerated batteries can generate the largest number of cancers and non-cancer diseases, representing 8.12E-09 to 2.28E-08 and 8.96E-10 and 2.52E-09 cases/kg of ash, respectively. The results reveal hazards of burning discarded cellphones to recover precious metals, and pinpoints opportunities for manufacturers to reduce toxic materials used in specific electronic components marketed globally.
منابع مشابه
Distribution of trace elements in coal and coal fly ash and their recovery with mineral processing practices: A review
Today coal is among the most important energy sources. In order to meet the world's energy demands, low-calorie lignite with a high ash content is generally used in the large capacity coal-fired thermal power plants. As a result of coal firing, wastes such as fly ash, slag, and flue gas are also produced. Subsequently, toxic trace elements within coal are transferred to wastes such as slag, fl...
متن کاملImpacts of Artisanal Gold Mining on Water Quality: A Case Study of Tangandougou Commune in Sikasso Region, Mali
Introduction: Unsustainable natural resources utilization is on the increase in the developing countries thus the ability of many local communities to meet their basic needs including food, water and shelter is jeopardized. Uncontrolled gold-mining in Sikasso region is one such an anthropogenic activity that is of great environmental concern to the local and national governments of Mali owing t...
متن کاملKnowledge and perceptions of health and environmental risks related to artisanal gold mining by the artisanal miners in Burkina Faso: a cross-sectional survey
Introduction Artisanal gold mining is an activity ensuring the survival of about 700,000 families in Burkina Faso with a considerable contribution to the national economy. Techniques and chemicals used in the operation, have adverse impacts on health and the environment. Our study aims to evaluate the perceptions and knowledge of these different impacts among artisanal gold miners. Methods A ...
متن کاملCurrent Mercury Exposure from Artisanal and Small-Scale Gold Mining in Bombana, Southeast Sulawesi, Indonesia—Future Significant Health Risks
The rapid expansion of the artisanal and small-scale gold mining (ASGM) industry in developing countries has marginalized the local communities in poverty, and resulted in occupational exposure to mercury via the gold extraction process. We investigated the mercury exposure of the mining workers lived inside and outside the mining area. Based on the occupations of the contributors, the hair sam...
متن کاملThe Minamata Convention on Mercury: Time to Seek Solutions with Artisanal Mining Communities
Gibb and O’Leary (2014) provided a timely review of the health effects of mercury in artisanal and small-scale gold mining (ASGM), calling for immediate implementation of the recently signed Minamata Convention on Mercury. They noted that Article 7 of the Convention [United Nations Environment Programme (UNEP) 2013] requires national action plans that include a public health strategy on mercury...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Journal of hazardous materials
دوره 278 شماره
صفحات -
تاریخ انتشار 2014