Nanostructured ion beam-modified Ge films for high capacity Li ion battery anodes
نویسندگان
چکیده
Related Articles Three-dimensional elemental mapping of hollow Fe2O3@SiO2 mesoporous spheres using scanning confocal electron microscopy Appl. Phys. Lett. 100, 213117 (2012) High thermal conductivity epoxy-silver composites based on self-constructed nanostructured metallic networks J. Appl. Phys. 111, 104310 (2012) Comment on “Advanced mechanical properties of graphene paper” [J. Appl. Phys. 109, 014306 (2011)] J. Appl. Phys. 111, 106101 (2012) Preparation of graphene nanoflakes/polymer composites and their performances for actuation and energy harvesting applications J. Appl. Phys. 111, 104904 (2012) Formation and transformation of embedded GaN nanocrystals Appl. Phys. Lett. 100, 203113 (2012)
منابع مشابه
High capacity Li ion battery anodes using ge nanowires.
Ge nanowire electrodes fabricated by using vapor-liquid-solid growth on metallic current collector substrates were found to have good performance during cycling with Li. An initial discharge capacity of 1141 mA.h/g was found to be stable over 20 cycles at the C/20 rate. High power rates were also observed up to 2C with Coulombic efficiency > 99%. Structural characterization revealed that the Ge...
متن کاملNanoscale Heterogeneity of Multilayered Si Anodes with Embedded Nanoparticle Scaffolds for Li‐Ion Batteries
A new approach on the synthesis of Si anodes for Li-ion batteries is reported, combining advantages of both nanoparticulated and continuous Si films. A multilayered configuration prototype is proposed, comprising amorphous Si arranged in nanostructured, mechanically heterogeneous films, interspersed with Ta nanoparticle scaffolds. Particular structural features such as increased surface roughne...
متن کاملNew nanostructured Li2S/silicon rechargeable battery with high specific energy.
Rechargeable lithium ion batteries are important energy storage devices; however, the specific energy of existing lithium ion batteries is still insufficient for many applications due to the limited specific charge capacity of the electrode materials. The recent development of sulfur/mesoporous carbon nanocomposite cathodes represents a particularly exciting advance, but in full battery cells, ...
متن کاملPreparation of 3D nanoporous copper-supported cuprous oxide for high-performance lithium ion battery anodes.
Three-dimensional (3D) nanoporous architectures can provide efficient and rapid pathways for Li-ion and electron transport as well as short solid-state diffusion lengths in lithium ion batteries (LIBs). In this work, 3D nanoporous copper-supported cuprous oxide was successfully fabricated by low-cost selective etching of an electron-beam melted Cu(50)Al(50) alloy and subsequent in situ thermal ...
متن کاملIon beam-mixed Ge electrodes for high capacity Li rechargeable batteries
Ion beam modification to effect ion beam mixing without changing morphology was investigated as a means to improve the electrochemical performance of Ge thin film electrodes for rechargeable Li batteries. As a result of a minimum tenfold increase in the strength of adhesion of the Ge film to the current collector (substrate), the ion beam-mixed electrodes exhibited stable specific capacities of...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012