Metallized Film Capacitor Lifetime Evaluation and Failure Mode Analysis

نویسنده

  • R. Gallay
چکیده

One of the main concerns for power electronic engineers regarding capacitors is to predict their remaining lifetime in order to anticipate costly failures or system unavailability. This may be achieved using a Weibull statistical law combined with acceleration factors for the temperature, the voltage, and the humidity. This paper discusses the different capacitor failure modes and their effects and consequences.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Health Monitoring of DC link Capacitors

Electrolytic and metallized polypropylene film (MPPF) capacitors are among the most popular capacitors used in electronic equipments. The choice of capacitors is of major importance because one of the most frequent causes of the equipment breakdowns results from the failure of capacitors, and will therefore determine the overall lifetime of the system. Electrolytic capacitors present higher cap...

متن کامل

Metallized polymer film capacitors ageing law based on capacitance degradation

Passive components, particularly capacitors, are very used devices in power electronics applications providing key function on board. Nevertheless, capacitors breakdowns can have catastrophic consequences on the financial and human scale; a good acquaintance of their deterioration over time would contribute in the improvement of the availability of the whole system by performing a predictive ma...

متن کامل

Thermal simulation for geometric optimization of metallized polypropylene film capacitors

In this paper, we use an analytic model to calculate the losses in the metallized polypropylene film capacitors. The model is validated experimentally for capacitors having the same capacitance but different geometry. For each group of capacitors a temperature distribution in the roll is assumed with the aim of optimizing its thermal performance. It appears that the heating of a long capacitor ...

متن کامل

Low frequency model of stacked film capacitors inductance

Polypropylene metallized capacitors are of general use in power electronics because of their reliability, their self healing capabilities, and their low price. Though the behavior of metallized coiled capacitors has been discussed, no work was done about stacked and flattened metallized capacitors. The purpose of this article is to propose a simple analytical low frequency model of stacked capa...

متن کامل

Die Attach for High Temperature Electronics Packaging

AuSi, patterned Au and off-eutectic Sn-Au-Sn die attach materials and processes have been investigated for SiC die attach for high temperature applications. AuSi shear test results after 3000 hours of aging at 325C in air showed only a slight decrease in shear strength when assembled on Mo:Mn/Pd/Au metallized AlN. However, when assembled on Mo:Mn/Ni/Au metallized AlN, the die shear strength dec...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015