Theoretical Study of Design and Operating Parameters on the Reciprocating Compressor Performance
نویسندگان
چکیده
Mathematical simulation for the reciprocating compressor cycle incorporating the effects of common faults has been developed. The governing equations for different processes are derived by using first law of thermodynamics, continuity equation, equation of mass flow through valves, kinematic equation for piston movement and the cylinder heat transfer correlations. This paper gives the results of theoretical study of effects of design and operating parameters on compressor performance.
منابع مشابه
Study on the Fatigue Strength of a Suction Flapper Valve Used in a High Efficient Reciprocating Compressor
Suction valves with even thinner and narrower, used in a high efficient reciprocating compressor, are required in order to reduce suction resistances. However, low flow resistance suction valves run properly under the very severe operating condition of high periodic impact stress which can cause the compressor failure. In this study, the effects of the valve design parameters on the impact fati...
متن کاملParametric study on axial compressor performance in design condition
In This paper, a parametric study of compressor performances was performed by streamline curvature method (SLC). Effects of three input parameters in design process, e.g., number of blades, distribution of blade thickness, and blade sweep angels, on the main objective parameters in aerodynamic design, e.g., velocity distribution, efficiency and pressure ratio, has been investigated in the param...
متن کاملOperation Analysis of Rotary Tools of Compressor Station Using Exergy Approach
In this study, operation of compressor station has been investigated by exergy approach. Exergy analysis is a thermodynamic method which shows the irreversibility of a system quantitatively. Gas compressors are used to compensate the pressure drop along the gas pipeline significantly. The compression process causes temperature rise of gas; in this regard gas cooler is applied to reduce the temp...
متن کاملComparison Of Hermetic Scroll And Reciprocating Compressors Operating Under Varying Refrigerant Charge And Load
An experimental rig has been built to test a horizontal scroll compressor and a reciprocating compressor of similar size and capacity. The compressors were tested with refrigerant.R404A operating at varying evaporator and condenser temperatures. The paper provides much needed information regarding the efficiency of the compressors operating under the same conditions with the same system paramet...
متن کاملExperimental Research and Construction Heat Circuit for a Semihermetik Refrigerant Reciprocating Compressor
The given paper is aimed at constructing the general circuit of heat processes in a semihermetic reciprocating refrigerant compressor as a basis of application of new ecology-friendly refrigerants as well as optimizing design parameters of compressor. While performing this work the following problems were solved: 1. Experimental research of heat processes in a semihermetic refrigerant reciproca...
متن کامل