Micromixing in a Rotor–Stator Spinning Disc Reactor

نویسندگان

  • Arturo N. Manzano Martínez
  • Kevin M.P. van Eeten
  • Jaap C. Schouten
  • John van der Schaaf
چکیده

This paper presents the micromixing times in a rotor-stator spinning disc reactor. Segregation indices are obtained at different rotational speeds performing the Villermaux-Dushman parallel-competitive reaction scheme. Consequently, the corresponding micromixing times are calculated using the engulfment model, while considering the self-engulfment effect. It was found that the segregation index decreases with an increasing disc speed. Furthermore, for the investigated operational conditions, the estimated micromixing times are in the range of 1.13 × 10-4 to 8.76 × 10-3 seconds, in agreement with the theoretical dependency on the energy dissipation rate of ε-0.5. In a rotor-stator spinning disc reactor it is thus possible to further continue the theoretical trend of decreasing micromixing times with very high levels of energy dissipation rates that are unattainable in traditional types of process equipment.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Radially resolved measurement of stator heat transfer in a rotor–stator disc system

0017-9310/$ see front matter 2009 Elsevier Ltd. A doi:10.1016/j.ijheatmasstransfer.2009.09.006 * Corresponding author. Tel.: +44 (0) 20 7594 6215 E-mail addresses: [email protected] (D.A. ac.uk (A.S. Holmes), [email protected] (K.R. Pu This paper describes a new experimental method for measuring stator heat transfer in a rotor–stator disc system using an electrical heater array. Th...

متن کامل

Nusselt Number Measurement of Air Flow between Grooved Rotor and Stator of a Generator

In this article, turbulent flow heat transfer in the air gap between rotor and stator of a generator under nonhomogeneous heat flux is studied experimentally. The rotor consists of four symmetrical triangular grooves. The stator surface is smooth and does not include any grooves. The relative heat flux between the rotor and the stator is 1 to 3. Temperature and heat flux are measured locally at...

متن کامل

Nusselt Number Measurement of Air Flow between Grooved Rotor and Stator of a Generator

In this article, turbulent flow heat transfer in the air gap between rotor and stator of a generator under nonhomogeneous heat flux is studied experimentally. The rotor consists of four symmetrical triangular grooves. The stator surface is smooth and does not include any grooves. The relative heat flux between the rotor and the stator is 1 to 3. Temperature and heat flux are measured locally at...

متن کامل

A Tubular Reactor of Axial Dispersion and Micromixing

In this paper, we extend the MURM (Modified Universe Reaction Model) of a CSTR to a tubular reactor with axial dispersion. Furthermore, we use this mixing model to study the effort of the micromixing on the steady state multiplicity for an autocatalytical reaction of tubular reactor.

متن کامل

A Novel MRAS Based Estimator for Speed-Sensorless Induction Motor Drive

In this paper, a novel stator current based Model Reference Adaptive System (MRAS) estimator for speed estimation in the speed-sensorless vector controlled induction motor drives is presented. In the proposed MRAS estimator, measured stator current of the induction motor is considered as a reference model. The estimated stator current is produced in an adjustable model to compare with the measu...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 56  شماره 

صفحات  -

تاریخ انتشار 2017