Hysteresis Control for Current Harmonics Suppression Using Shunt Active Filter
نویسندگان
چکیده
Recently wide spread of power electronic equipment has caused an increase of the harmonic disturbances in the power systems. The nonlinear loads draw harmonic and reactive power components of current from ac mains. Current harmonics generated by nonlinear loads such as adjustable speed drives, static power supplies and UPS. Thus a perfect compensator is required to avoid the consequences due to harmonics. To overcome problems due to harmonics, Shunt Active Power Filter (SAPF) has been considered extensively. SAPF has better harmonic compensation than the other approaches used for solving the harmonic related problems. The performance of the SAPF depends upon different control strategies. This paper presents the performance analysis of SAPF under most important control strategy namely instantaneous real active and reactive power method (p-q) for extracting reference currents of shunt active filters under unbalanced load condition. Detailed simulations have been carried out considering this control strategy and adequate results were presented. In this paper, harmonic control strategy is applied to compensate the current harmonics in the system. A detailed study about the harmonic control method has been used using shunt active filter technique. KEYWORDS—Harmonic Suppression, Hysteresis Current control, Instantaneous power (p–q) theory, PI Controller, Power System, Shunt Active Power Filter. ___________________________________________________________________________________________________
منابع مشابه
Power System Harmonic Compensation Using Shunt Active Power Filter
This paper shows the method of improving the power quality using shunt active power filter. The proposedtopic comprises of PI controller, filter hysteresis current control loop, dc link capacitor. The switching signal generation for filter is fromhysteresis current controller techniques. With the all these element shunt active power filter reduce the total harmonic distortion. Thispaper represe...
متن کاملPower System Harmonic Reduction Using Shunt Active Filter
This paper shows the method of improving the power quality using shunt active power filter. The proposed topic comprises of PI controller, filter hysteresis current control loop, dc link capacitor. The switching signal generation for filter is from hysteresis current controller techniques. With the all these element shunt active power filter reduce the total harmonic distortion. This paper repr...
متن کاملMitigation of Switching Harmonics in Shunt Active Power Filter Based on Variable Structure Control Approach
This paper presents a novel control approach used in shunt active power filter based on variable structure control combined with Random PWM technique (RVSC) that provides robust, fast, and more favorable performance for active power filter. This control strategy is compared with two other strategies to show the effectiveness of the introduced methods; pulse width modulated proportional-integral...
متن کاملApplicability improvement and hysteresis current control method simplification in shunt active filters
Hysteresis current control method is vastly used in PWM inverters because of simplicity in performance, fast control response and good ability in limiting peak current. However, switching frequency in hysteresis current control method with fixed bandwidth has large variation during a cycle and therefore causes non-optimal current ripple generation in output current. One of basic problems in imp...
متن کاملAdaptive Hysteresis Band Based Fuzzy Controlled Shunt Active Power Filter
Conventional hysteresis current controllers have the disadvantage of a variable switching frequency. This paper proposes a fuzzy hysteresis band technique for the current control for shunt active power filter (SAPF). An active harmonic filter is used to eliminate current harmonics caused by nonlinear loads. The current control strategy utilizes using a selective Filter STF method to improve pow...
متن کامل