Semi-smooth Newton methods for mixed FEM discretizations of higher-order for frictional, elasto-plastic two-body contact problems

نویسندگان

  • H. Blum
  • H. Ludwig
  • A. Rademacher
چکیده

In this acticle a semi-smooth Newton method for frictional two-body contact problems and a solution algorithm for the resulting sequence of linear systems is presented. It is based on a mixed variational formulation of the problem and a discretization by finite elements of higher-order. General friction laws depending on the normal stresses and elasto-plastic material behaviour with linear isotropic hardening are considered. Numerical results show the efficiency of the presented algorithm.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A computational approach for thermo-elasto-plastic frictional contact based on a monolithic formulation using non-smooth nonlinear complementarity functions

A new monolithic solution scheme for thermo-elasto-plasticity and thermo-elasto-plastic frictional contact with finite deformations and finite strains is presented. A key feature is the reformulation of all involved inequality constraints, namely those of Hill’s orthotropic yield criterion as well as the normal and tangential contact constraints, in terms of non-smooth nonlinear complementarity...

متن کامل

On hp-adaptive BEM for frictional contact problems in linear elasticity

A mixed formulation for a Tresca frictional contact problem in linear elasticity is considered in the context of boundary integral equations, which is later extended to Coulomb friction . The discrete Lagrange multiplier, an approximation of the surface traction on the contact boundary part, is a linear combination of biorthogonal basis functions. In case of curved elements, these are the solut...

متن کامل

On Solving Frictional Contact Problems Part I: Abstract Framework and the Static Case. submitted to IJNAM as Mixed FEM of Higher Order for Contact Problems with Friction

Keywords hp-FEM · contact problems This paper presents mixed variational formulation and its discretization with finite elements of higher-order for Signorini's problem with Tresca's friction. To guarantee the unique existence of the discrete saddle point of the mixed method, a discrete inf-sup condition is proven. Moreover, a solution scheme based on the dual formulation of the mixed method is...

متن کامل

An analysis of three-dimensional elasto-plastic sinusoidal contact

Researchers have developedmanymodels to simulate the elasto-plastic contact of spheres. However, there does not appear to exist a closed-form analytical model for elasto-plastic three-dimensional sinusoidal contact. This work uses a finite element model (FEM) to characterize elasto-plastic sinusoidal contact. Although at initial contact the sphere and sinusoidal case are very similar and can bo...

متن کامل

A 3D elasto-plastic FEM program developed for reservoir Geomechanics simulations: Introduction and case studies

The development of yielded or failure zone due to an engineering construction is a subject of study in different disciplines. In Petroleum engineering, depletion from and injection of gas into a porous rock can cause development of a yield zone around the reservoir. Studying this phenomenon requires elasto-plastic analysis of geomaterial, in this case the porous rocks. In this study, which is a...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014