Topographic influence on stability for gas wells penetrating longwall mining areas
نویسندگان
چکیده
منابع مشابه
Influence of Stratigraphic Conditions on the Deformation Characteristics of Oil/Gas Wells Piercing Longwall Pillars and Mining Optimization
Hydrocarbon wells drilled vertically through longwall coal pillars are vulnerable to severe deformation and potential failure as a result of underground coal mining. The lithology of the host rocks play a critical role in well stability. In this study, a two dimensional finite element method is employed to investigate the horizontal shear offset, vertical delamination, and compression at the we...
متن کاملExtension of Excavation Damaged Zone Due to Longwall Working Effect
In advance longwall mining, the safety of mine network, production rate, and consequently, economic conditions of a mine are dependent on the stability conditions of gate roadways. The gate roadway stability is a function of two important factors: 1) characteristics of the excavation damaged zone (EDZ) above the gate roadway and 2) loading effect due to the caving zone (CZ) above the longwall w...
متن کاملReservoir simulation-based modeling for characterizing longwall methane emissions and gob gas venthole production
Longwall mining alters the fluid-flow-related reservoir properties of the rocks overlying and underlying an extracted panel due to fracturing and relaxation of the strata. These mining-related disturbances create new pressure depletion zones and new flow paths for gas migration and may cause unexpected or uncontrolled migration ofgas into the underground workplace. One common technique to contr...
متن کاملLong-term stability analysis of goaf area in longwall mining using minimum potential energy theory
Estimation of the height of caved and fractured zones above a longwall panel along with the stability conditions of the goaf area are very crucial to determine the abutment stresses, ground subsidence, and face support as well as designing the surrounding gates and intervening pillars. In this work, the height of caving-fracturing zone above the mined panel is considered as the height of destre...
متن کاملNumerical Analysis of the Impact of Longwall Panel Width on Methane Emissions and Performance of Gob Gas Ventholes
In coal mining, longwall mining is a preferred method to maximize production by extracting large blocks of coal that have been outlined with a set of development entries. In U.S. mines, longwall panels are typically 305 m (1,000ft) wide (with a continual trend towards even wider panels), and usually over 3,050 m (10,000ft) in length. The increasing size of longwall panels, while helping to incr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2014